Skip to content

UNW P90 MAG MOUNT FOR THE PLANET ECLIPSE ETHA 2, EMEK AND EMF100

Advertising
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.

  • 5.6k views
  • 3 likes
  • 15 downloads
  • 3 collections

License
3D design format
TXT and ZIP Folder details Close
  • 50 68 cal original sized mags.zip
    • 50 68cal v23 and N23 parts/Front mount N23/EMF100 P90 mount FRONT LOW N23.stl
    • 50 68cal v23 and N23 parts/Front mount N23/EMF100 P90 mount FRONT LOW Winged N23.stl
    • 50 68cal v23 and N23 parts/Front mount N23/EMF100 P90 mount FRONT RAIL LOW N23.stl
    • 50 68cal v23 and N23 parts/Front mount N23/EMF100 P90 mount FRONT RAIL N23.stl
    • 50 68cal v23 and N23 parts/Front mount N23/STEP/EMF100 P90 mount FRONT LOW N23.step
    • 50 68cal v23 and N23 parts/Front mount N23/STEP/EMF100 P90 mount FRONT LOW Winged N23.step
    • 50 68cal v23 and N23 parts/Front mount N23/STEP/EMF100 P90 mount FRONT RAIL LOW N23.step
    • 50 68cal v23 and N23 parts/Front mount N23/STEP/EMF100 P90 mount FRONT RAIL N23.step
    • 50 68cal v23 and N23 parts/Mid pannel N23/EMF100 P90 mount MID narrow pannel N23.stl
    • 50 68cal v23 and N23 parts/Mid pannel N23/EMF100 P90 mount MID pannel N23.stl
    • 50 68cal v23 and N23 parts/Mid pannel N23/STEP/EMF100 P90 mount MID narrow pannel N23.step
    • 50 68cal v23 and N23 parts/Mid pannel N23/STEP/EMF100 P90 mount MID pannel N23.step
    • 50 68cal v23 and N23 parts/mount slide v23 N23/P90 mag mount BASE SLIDE LPM.step
    • 50 68cal v23 and N23 parts/mount slide v23 N23/P90 mag mount BASE SLIDE LPM.stl
    • 50 68cal v23 and N23 parts/mount top plate v23 N23/EMF100 P90 mag mount BASE TOP v2.step
    • 50 68cal v23 and N23 parts/mount top plate v23 N23/EMF100 P90 mag mount BASE TOP v2.stl
    • 50cal N23 mag mount/EMF100 P90 N23 50 cal mag mount BASE v1.step
    • 50cal N23 mag mount/EMF100 P90 N23 50 cal mag mount BASE v1.stl
    • 68cal N23 mag mount/EMF100 P90 N23 mag mount BASE v1.step
    • 68cal N23 mag mount/EMF100 P90 N23 mag mount BASE v1.stl
    • ONLY for old users/old updateded front mounts for old shroud and lower/V23 N23 for EMF100 rail/EMF100 P90 mount FRONT LOW p1.stl
    • ONLY for old users/old updateded front mounts for old shroud and lower/V23 N23 for EMF100 rail/EMF100 P90 mount FRONT LOW RAIL p1.stl
    • ONLY for old users/old updateded front mounts for old shroud and lower/V23 N23 for EMF100 rail/EMF100 P90 mount FRONT LOW WINGED p1.stl
    • ONLY for old users/old updateded front mounts for old shroud and lower/V23 N23 for EMF100 rail/EMF100 P90 mount FRONT RAIL p1.stl
    • ONLY for old users/old updateded front mounts for old shroud and lower/V23 N23 for EMF100 rail/STEP/EMF100 P90 mount FRONT LOW p1.step
    • ONLY for old users/old updateded front mounts for old shroud and lower/V23 N23 for EMF100 rail/STEP/EMF100 P90 mount FRONT LOW RAIL p1.step
    • ONLY for old users/old updateded front mounts for old shroud and lower/V23 N23 for EMF100 rail/STEP/EMF100 P90 mount FRONT LOW WINGED p1.step
    • ONLY for old users/old updateded front mounts for old shroud and lower/V23 N23 for EMF100 rail/STEP/EMF100 P90 mount FRONT RAIL p1.step
    • ONLY for old users/OUTDATED V23 series/50cal mount/50 cal EMF100 P90 mag mount BASE v4.step
    • ONLY for old users/OUTDATED V23 series/50cal mount/50 cal EMF100 P90 mag mount BASE v4.stl
    • ONLY for old users/OUTDATED V23 series/68cal mount/EMF100 P90 mag mount BASE v4.step
    • ONLY for old users/OUTDATED V23 series/68cal mount/EMF100 P90 mag mount BASE v4.stl
    • ONLY for old users/OUTDATED V23 series/EMF100 P90 mount MID pannel v2.stl
    • ONLY for old users/OUTDATED V23 series/mount addon/low addon.step
    • ONLY for old users/OUTDATED V23 series/mount addon/low addon.stl
    • ONLY for old users/OUTDATED V23 series/mount addon/low rail addon.step
    • ONLY for old users/OUTDATED V23 series/mount addon/low rail addon.stl
    • ONLY for old users/OUTDATED V23 series/mount addon/READ ME mount addon.txt
    • ONLY for old users/OUTDATED V23 series/STEP/EMF100 P90 mount MID pannel v2.step
    • ONLY for old users/update part for V23/Front mount spacer block.step
    • ONLY for old users/update part for V23/Front mount spacer block.stl
  • 68 cal NW64 wide mags.zip
    • 50cal NW64 mag mount/50cal EMF100 P90 NW64 mag mount BASE v1.step
    • 50cal NW64 mag mount/50cal EMF100 P90 NW64 mag mount BASE v1.stl
    • 68cal NW64 mag mount/EMF100 P90 NW64 mag mount BASE v1.step
    • 68cal NW64 mag mount/EMF100 P90 NW64 mag mount BASE v1.stl
    • front mounts/EMF100 P90 NW64 mount FRONT LOW RAIL.stl
    • front mounts/EMF100 P90 NW64 mount FRONT LOW WINGED.stl
    • front mounts/EMF100 P90 NW64 mount FRONT LOW.stl
    • front mounts/EMF100 P90 NW64 mount FRONT RAIL.stl
    • front mounts/STEP/EMF100 P90 NW64 mount FRONT LOW RAIL.step
    • front mounts/STEP/EMF100 P90 NW64 mount FRONT LOW WINGED.step
    • front mounts/STEP/EMF100 P90 NW64 mount FRONT LOW.step
    • front mounts/STEP/EMF100 P90 NW64 mount FRONT RAIL.step
    • mag mount base parts/EMF100 P90 NW64 mag mount BASE TOP V1.stl
    • mag mount base parts/NW64 P90 mag mount BASE SLIDE.stl
    • mag mount base parts/STEP/EMF100 P90 NW64 mag mount BASE TOP V1.step
    • mag mount base parts/STEP/NW64 P90 mag mount BASE SLIDE.step
    • Mid pannel/EMF100 P90 NW64 mount MID narrow pannel v1.stl
    • Mid pannel/EMF100 P90 NW64 mount MID pannel v1.stl
    • Mid pannel/STEP/EMF100 P90 NW64 mount MID narrow pannel v1.step
    • Mid pannel/STEP/EMF100 P90 NW64 mount MID pannel v1.step
  • PIC.zip
  • READ ME UNW P90 ETHA 2 EMEK EMF100 MAG MOUNT.txt

Learn more about the formats

Last update 2023-11-30 at 10:03
Publication date 2022-09-14 at 20:13
Design number 845959

3D printer file info

3D model description

(big V23 and N23 update!)

the new N23 50 and 68 cal mounds have been added
also the new NW64 mag mount in 50 or 68cal have added as well

the pictures and documentation are still old. also the text below needs to be checkedā€¦

but at the very least new users can print out the N23 series of files

I will explain very soon what the differences will be and why some of the old users may want to switch over to the N23, or just choose to update some parts and leave other things as they are.

17-11-2023
narrow mid Panel is file added


(the mount is for the 68 cal and 50 cal mags)

this mount can be used with or with out the bullpup kit. and makes it possible to use the UNW P90 mags that can hold 28 rounds with your paintball marker. but there are also other options out there. like the G11TIPX mag and Hi-cap mag (hopper adapter).

as you can see on the pictures are there a view options when it comes down to the front morning part. this is so you can have custom look. but at the same time also to make this mag mount more flexible for the current mags and future designs.

but the original P90 design does help in guiding the mags into place. so in case you donā€™t like the tall look to the original the low wigged is a good middle ground

I do say that the grub screw needs to be at 2mm in hight. that functions to activate the magazines. but itā€™s possible that is need a slight adjustment. this will be covered in the UNW P90 PDF. I do like the idea of having a smooth top on the grub screw so that is why I like it to be installed the what itā€™s shown with the hex key mount hole at the bottom of your Mag mount.

why the ā€œstipplingā€ with a soldering iron of the insides of the rail mounted parts. well at first I was trying to go for a ā€œgood fitā€ but this was a hard thing to get right. since printing orientations seemed to have a effect on this as well. when tolerances were getting to tight. and making these small lines is easy to do and make it so that you can remove some unwanted play in the parts in case you have some issues with itā€¦

the slide. you want the slide to move smoothly and not get stuck when itā€™s fully compressed. this can be because of support remains or elephant food. but you can also play around with the spring tension if you like I used to use 2 springs with a 0.5mm wide instead of the now recommended 0.6mm wire. since I noticed that adding 1 extra spring with some stiff wire was actually a lot better. so you may want to play around with it so the slide is sliding al the way forward every time when the mag is placed in the mount.

compatibility note:
this mag mount will work for the Planet Eclipse ETHA 2, EMEK and EMF100 (EMG100)

Video Links:

UNW P90 Planet eclipse EMF100 edition
https://www.youtube.com/watch?v=0uPL_J2TmEE&t=3s

Video Links to mag options for this mount:

UNW P90 Project update: ESG Euro SuperGame 2022 after report
https://odysee.com/@UntangleWORKS:a/UNW-P90-2022-update-ESG-after-report:2

UNW P90: step by step mag function check (and a bit of a update)
https://www.youtube.com/watch?v=BqOoVJ2hh8s
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-function-check:b

UNW P90 MAG VS those... other paintball MAGS
https://www.youtube.com/watch?v=S-up50s3zvo
https://odysee.com/@UntangleWORKS:a/UNW-P90-MAG-VS-those-other-MAGS:2

UNW P90 mag assembly video
https://www.youtube.com/watch?v=eI5-sqQGx0I
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-assembly:b

UNW P90 mag assembly for the open mag version
https://odysee.com/@UntangleWORKS:a/UNW-P90-windows-mag:f

The UNW P90 Hi cap mag or in other words a hopper adapter for the UNW P90
https://www.youtube.com/watch?v=A3yAlBoDHIg
https://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap:b

UNW P90 Hi cap mag lid
https://www.youtube.com/watch?v=L9vtBMNIMkM
https://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap-lid:4

demo about the mag plugs at 12:20
https://youtu.be/0uPL_J2TmEE

UNW P90: Template ring for the P90 airsoft mags
https://youtu.be/kufvl5E0RiU

UNW P90: G11 styled tippmann Tipx mag adapter
https://www.youtube.com/watch?v=_U-nBrJH1hM
https://odysee.com/@UntangleWORKS:a/UNW-P90-G11:a

UNW P90 mag winder
https://youtu.be/v1cIc2swRdg
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-winder:9

UNW P90 mag winder ring
https://youtu.be/KMoFYRpW4_E
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-winder-ring-B:9

UNW P90 mag speed loader
https://youtu.be/lVzFHDjsehg
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-speed-loader:a

UNW P90 mag speed loader bumper
https://youtu.be/4S5K_jraJXI
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-speed-loader-bumper:6

materials needed:
2x spring 6mm OD, 0.6mm wire, 20mm long
Note: you can add one more if you like it to give the slide more power

2x M2.5 Bolt 16mm long

1x M5 grub screw
Note: this needs to stick 2mm up from the mount, use some callipers for this.

2x M5 bolt 25mm long

1x M5 bolt 35mm long

3D printing settings

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the fieldā€¦

Print-bed requirement: the files are designed to work on a ENDER 3 Pro, that haves a print volume of, X 220mm, Y 220mm and Z 250mm. with that said itā€™s not necessarily maxing out to those sizesā€¦

Advertising


Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, ā€¦) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi šŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!


Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.

100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.