Skip to content

C-Bot 3D Printer

C-Bot_Rework.JPG C-Bot 3D Printer
C-Bot_Rework_Z_Options.JPG C-Bot 3D Printer
IMG_1012.JPG C-Bot 3D Printer
VESSEL 1), ai , ve n r oO y sy ~ FS a Silla AA , 1 of f fn C-Bot 3D Printer
IMG_1036.JPG C-Bot 3D Printer
IMG_0914.JPG C-Bot 3D Printer
IMG_0807.jpg C-Bot 3D Printer
3__1_.jpg C-Bot 3D Printer
IMG_0806.jpg C-Bot 3D Printer
IMG_0813.jpg C-Bot 3D Printer
3__2_.jpg C-Bot 3D Printer
IMG_0809.jpg C-Bot 3D Printer
IMG_0811.jpg C-Bot 3D Printer
3__3_.jpg C-Bot 3D Printer
IMG_0812.jpg C-Bot 3D Printer
IMG_0814.jpg C-Bot 3D Printer
IMG_1035.JPG C-Bot 3D Printer
c22debc6f5e4b5bae2c2e24b544d0924.png C-Bot 3D Printer
C-Bot_Filament_Spool_Holder_x1.stl C-Bot 3D Printer
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.6k views
  • 3 likes
  • 50 downloads
  • 1 make
License
3D design format
Folder details Close
  • C-Bot_Filament_Spool_Holder_x1.stl
  • C-Bot_Rework_Stls.zip
    • Frame Brackets/C-Bot Inside Corner 4x6 (x4) Optional.stl
    • Frame Brackets/C-Bot L Plate 2x4 (x2).stl
    • Frame Brackets/C-Bot L Plate 2x4 F (x2).stl
    • Frame Brackets/C-Bot L Plate 4x4 (x2).stl
    • Frame Brackets/C-Bot L Plate 4x4 F (x2).stl
    • Frame Brackets/C-Bot Plate 4x4 (x2).stl
    • Hot End & Filament Feed/Bowden Option/C-Bot Bowden Carriage Rear Plate (x1).stl
    • Hot End & Filament Feed/Bowden Option/C-Bot Bowden Filament Drive (x1).stl
    • Hot End & Filament Feed/Bowden Option/C-Bot V-Wheel Spacer (x8).stl
    • Hot End & Filament Feed/Bowden Option/Dual Hotend/C-Bot Bowden Dual Front Plate (x1).stl
    • Hot End & Filament Feed/Bowden Option/Dual Hotend/C-Bot Bowden Filament Drive F (x1).stl
    • Hot End & Filament Feed/Bowden Option/Dual Hotend/C-Bot Filament Spool Cone (x2).stl
    • Hot End & Filament Feed/Bowden Option/Dual Hotend/C-Bot Filament Spool Holder (x1).stl
    • Hot End & Filament Feed/Bowden Option/Dual Hotend/C-Bot Groove Mount Hotend Clamp (x2).stl
    • Hot End & Filament Feed/Bowden Option/Dual Hotend/C-Bot Tube and Wiring Holder (x2).stl
    • Hot End & Filament Feed/Bowden Option/Single Hotend/C-Bot Bowden Single Front Plate (x1).stl
    • Hot End & Filament Feed/Bowden Option/Single Hotend/C-Bot Groove Mount Hotend Clamp (x1).stl
    • Hot End & Filament Feed/Bowden Option/Single Hotend/C-Bot Tube and Wiring Holder (x1).stl
    • Hot End & Filament Feed/C-Bot Belt Clamp (x4).stl
    • Hot End & Filament Feed/C-Bot Fan Duct by TruBlu832 (x1).stl
    • Hot End & Filament Feed/C-Bot Filament Spool Cone (x2).stl
    • Hot End & Filament Feed/C-Bot Filament Spool Holder (x1).stl
    • Hot End & Filament Feed/Direct Feed Option/C-Bot Direct Feed Extruder Front Plate (x1).stl
    • Hot End & Filament Feed/Direct Feed Option/C-Bot Direct Feed Extruder Rear Plate (x1).stl
    • Hot End & Filament Feed/Direct Feed Option/C-Bot Groove Mount Clamp (x1).stl
    • Hot End & Filament Feed/Direct Feed Option/C-Bot Tube and Wiring Holder (x2).stl
    • Hot End & Filament Feed/Direct Feed Option/C-Bot Tube Guide (x1).stl
    • Wiring Accessories (optional)/Wire Channel Long by Sheffdog.stl
    • Wiring Accessories (optional)/Wiring Accessories by Elmo Clarity/bottomlink.stl
    • Wiring Accessories (optional)/Wiring Accessories by Elmo Clarity/Cable Cover.stl
    • Wiring Accessories (optional)/Wiring Accessories by Elmo Clarity/openlinkpair.stl
    • Wiring Accessories (optional)/Wiring Accessories by Elmo Clarity/toplink.stl
    • Wiring Accessories (optional)/Wiring Accessories by Elmo Clarity/X Axis Support base.stl
    • Wiring Accessories (optional)/Wiring Accessories by Elmo Clarity/X Axis Support.stl
    • Wiring Accessories (optional)/Wiring Accessories by Elmo Clarity/Y Axis Support.stl
    • XY Assembly/C-BOT V-Wheel Spacer (x16).stl
    • XY Assembly/C-BOT XY Motor Mount Left (x1).stl
    • XY Assembly/C-BOT XY Motor Mount Right (x1).stl
    • XY Assembly/C-BOT XY Rear Idler (x1).stl
    • XY Assembly/C-BOT XY Rear Idler F (x1).stl
    • XY Assembly/C-BOT XY Slide Idler (x1).stl
    • XY Assembly/C-BOT XY Slide Idler w Endstop Contact (x1).stl
    • XY Assembly/C-BOT XY Slide Rear Plate (x2).stl
    • XY Assembly/C-BOT Y Endstop Holder (x1).stl
    • Z Assembly/C-Bot L Plate 2x3 (x2).stl
    • Z Assembly/C-Bot L Plate 2x3 F (x2).stl
    • Z Assembly/C-Bot Lead Screw Alt AcmeBlockHolder by NickM (x2).stl
    • Z Assembly/C-Bot Lead Screw Nut Capture (x2).stl
    • Z Assembly/C-Bot Lead Screw Nut Capture Alt for 24.5mm Flange (x2).stl
    • Z Assembly/C-Bot Lead Screw Nut Capture Script.scad
    • Z Assembly/C-Bot V-Wheel Spacer Long (x8).stl
    • Z Assembly/C-Bot V-Wheel Spacer Short (x8).stl
    • Z Assembly/C-Bot Z Axis 2x2 Corner Bracket (x2).stl
    • Z Assembly/C-Bot Z Axis Bed Mount (x4).stl
    • Z Assembly/C-Bot Z Endstop (Mech v1.2) (x1).stl
    • Z Assembly/C-Bot Z Motor Mount (x2).stl
    • Z Assembly/C-Bot Z Slide Bracket (x1).stl
    • Z Assembly/C-Bot Z Slide Bracket F (x1).stl
    • Z Assembly/C-Bot Z Slide Plate Rear (x2).stl

Learn more about the formats
Publication date 2022-09-16 at 23:53
?
Published to Thingiverse on: 2014-10-14 at 06:30
Design number 848925
cfeniak

cfeniak

3D printer file info

3D model description

Note: updates have been made to this design and are available through the links on the instructions tab (I don't want to maintain two locations).

For example: there are now 4 Z axis options available to accommodate your build size and preferences.

-original (2 rear leadscrews), shown modeled in red

-original offset, in OpenBuilds rework and D-bot remix, shown modeled in purple

-Front back, in OpenBuilds rework and used by AK-EriC, shown modeled in green

-3 lead screw options, developed by AdamCooks on OpenBuilds

Parts & BOM:

http://www.openbuilds.com/builds/c-bot.1146/

Discussion:

https://plus.google.com/u/0/communities/106707229610255461517

Build Blog:

http://www.akeric.com/blog/?page_id=2

Build Guide:

http://www.thingiverse.com/thing:1001065

Modifications & Accessories:

http://www.thingiverse.com/cfeniak/collections/c-bot

This is a Core XY printer that makes use of open builds V-Slot rails.

I designed this myself with a couple goals in mind:

-not to use any linear rod/bearings; I used V-slot for all guided motion

-no crossing belts as found in most core XY printers; I used two offset parallel belt runs

-run the belts through the extrusion when possible for a cleaner end product

-make the entire setup easily modifiable and adaptable so others can use it for alternate bed sizes

(I am using an 8x12, but changing to an 8x8, 10x10, or 12 "x12" is as easy as cutting your extrusion to different lengths, no part redesign required)

-a lesser goal was to minimize the amount of unique 3D printed parts required, but since I already have a functioning home built OB1.4, this goal fell by the wayside. None the less, you can see printed parts like corners and tees that can be replaced with items from the open builds parts store.

3D printing settings

-

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.