Elden Ring- Morgott/Margit
Elden Ring- Morgott/Margit
3D
Published 2022-09-16T08:26:56+00:00
Approximately 1:10 statue of Morgott/Margit. The pose for this model references the Playstation trophy art upon defeating
Morgott the Omen King.
Please read the assembly.pdf for details on printing this model. TEST FIT EVERYTHING prior to painting! I needed to sand some parts in order to fit them together and have compensated for it in this version, however, be pre-warned that you may need to sand the connections.
Due to the nature of the design and character, the tolerances on some keys (namely cloaks) are really tight, and may not be suitable to be downscaled. You may need to sand A LOT in order to fit it together if you decide to print this model smaller. Also be careful with the cloaks, as they do have some fragile bits on the end and some of them are fairly thin.
Printed on the Phrozen Sonic Mighty 8K mostly with Anycubic Gray resin and some other leftover off-brand resins.
| Date published | 16/09/2022 |
| Dimensions | 390W x 260D x 310H mm |
Gorgeous model!!! thanks for sharing. I am a newbie to all this 3D stuff, but printed it as a 40% in scale (around 12cm in height) and each part still works perfectly, thank you xD