RUNQI P90 water gel blaster UNW P90 MAG MOUNT conversion

(big V23 and N23 update!)

the 68 cal and 50 cal N23 mount have been added. the original mount is renamed to v23
this matters if you want to chance over to the new N23 mag slide part

(the mount is for the 68 cal and 50 cal mags)

Where to get your Runqi?
The RUNQI P90 is a water gel blaster. that can be found on places like Aliexpress sully by names like P90 gel blaster, not so much under the name Runqi P90. but they come in colours like Pink, White, and hydro dipped color-full illustrated variants. in a way to finish this build you would probely want to paint it anyways so I would just shop for the best price honestly… I did see that there is a P90 Mini model. this mount of course is based on the Full scale version. the Mini haves a grenade as a gel ball hopper were the mags go. so you should be able to spot the difference.

what markers can be used for this
UNW P90 build?
I have no idea, but I sure you can get some inspiration when you look around some DIY P90 paintball marker conversion builds that use airsoft P90 bodies. this would be a more low budget way of going about it. not that all airsoft P90 would have a strong plastic shell but this one is pretty thin. so it may crack on impact in cold weather?

are things after reading this PDF
still unclear?
then the video that I made may help you out where you can see it step by step.
Please whats the video to get a impression of what you need to do install the mount before downloading the parts

but there is a jig that will help you know where to cut the RUNQI body and then you can place this mag mount in. and it will be clamped into place

are there potentially useful parts in the RUNQI it self?
the trigger is not looking that nice (hallowed out) but the safety works like a P90 more or less. and it got a micro switch behind it so you might be able to use that for a electro marker

grub screw note
I do say that the grub screw needs to be at 2mm in hight. that functions to activate the magazines. but it’s possible that is need a slight adjustment. this will be covered in the UNW P90 PDF. I do like the idea of having a smooth top on the grub screw so that is why I like it to be installed the what it’s shown with the hex key mount hole at the bottom of your Mag mount.

the slide
the slide. you want the slide to move smoothly and not get stuck when it’s fully compressed. this can be because of support remains or elephant food. but you can also play around with the spring tension if you like I used to use 2 springs with a 0.5mm wide instead of the now recommended 0.6mm wire. since I noticed that adding 1 extra spring with some stiff wire was actually a lot better. so you may want to play around with it so the slide is sliding al the way forward every time when the mag is placed in the mount.

compatibility note:
this mag mount will work only work for the RUNQI P90 gel blaster, there is also a mini version but this one should not work. and there maybe look a likes around? that requitre more modding of this mount. I’m not sure how much P90 models there are out there when it comes down to gel blasters.

also note only the UNW P90 Classic mag will work in the RUNQI body since the sides of the top rail construction are that narrow is there no extra space for the OPEN en Solid mag version since those are slightly wider.

also the G11TIPX will not work unless you are willing to cut of the top rail section of the RUNQI.

the with the Hi-cap mag is there alone one model that should work with out having to remove the front rail section.

Video Links:

UNW P90 RUNQI: how to make and install the P90 Mount
https://www.youtube.com/watch?v=e_bRlBH4nZg&t=7s

Video Links to mag options for this mount:

UNW P90 Project update: ESG Euro SuperGame 2022 after report
https://odysee.com/@UntangleWORKS:a/UNW-P90-2022-update-ESG-after-report:2

UNW P90: step by step mag function check (and a bit of a update)
https://www.youtube.com/watch?v=BqOoVJ2hh8s
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-function-check:b

UNW P90 MAG VS those... other paintball MAGS
https://www.youtube.com/watch?v=S-up50s3zvo
https://odysee.com/@UntangleWORKS:a/UNW-P90-MAG-VS-those-other-MAGS:2

UNW P90 mag assembly video
https://www.youtube.com/watch?v=eI5-sqQGx0I
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-assembly:b

UNW P90 mag assembly for the open mag version
https://odysee.com/@UntangleWORKS:a/UNW-P90-windows-mag:f

The UNW P90 Hi cap mag or in other words a hopper adapter for the UNW P90
https://www.youtube.com/watch?v=A3yAlBoDHIg
https://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap:b

UNW P90 Hi cap mag lid
https://www.youtube.com/watch?v=L9vtBMNIMkM
https://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap-lid:4

demo about the mag plugs at 12:20
https://youtu.be/0uPL_J2TmEE

UNW P90: Template ring for the P90 airsoft mags
https://youtu.be/kufvl5E0RiU

UNW P90: G11 styled tippmann Tipx mag adapter
https://www.youtube.com/watch?v=_U-nBrJH1hM
https://odysee.com/@UntangleWORKS:a/UNW-P90-G11:a

UNW P90 mag winder
https://youtu.be/v1cIc2swRdg
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-winder:9

UNW P90 mag winder ring
https://youtu.be/KMoFYRpW4_E
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-winder-ring-B:9

UNW P90 mag speed loader
https://youtu.be/lVzFHDjsehg
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-speed-loader:a

UNW P90 mag speed loader bumper
https://youtu.be/4S5K_jraJXI
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-speed-loader-bumper:6

materials needed:
2x spring 6mm OD, 0.6mm wire, 20mm long
Note: you can add one more if you like it to give the slide more power

2x M2.5 Bolt 16mm long

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

Print-bed requirement: the files are designed to work on a ENDER 3 Pro, that haves a print volume of, X 220mm, Y 220mm and Z 250mm. with that said it’s not necessarily maxing out to those sizes…