Skip to content

Crawler Cat 1 Expedition Cab - 1/10 RC body attachment

IMG_20220915_100123_edited_edited_edited.jpg Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
IMG_20220915_100945.jpg Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
IMG_20220915_101033.jpg Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
IMG_20220915_101111_edited.jpg Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Cat-1-expedition-cab-4.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Cat-1-expedition-cab-5.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Cat-1-expedition-cab-6.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Cat-1-expedition-cab-7.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Cat-1-expedition-cab-8.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Cat-1-expedition-cab-9.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
print-orientation.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Body-comparison.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Body-comparison-1.png Crawler Cat 1 Expedition Cab - 1/10 RC body attachment
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.7k views
  • 17 likes
  • 12 downloads
  • 2 collections
License
3D design format
PDF and ZIP Folder details Close
  • ahead RC Cat 1 expedition cab.pdf
  • ahead RC Crawler Cat 1 Expedition Cab.zip
    • ahead RC Cat 1 expedition cab.pdf
    • Accessories/antenna mount.stl
    • Accessories/cab side hinge (1).stl
    • Accessories/cab side hinge (10).stl
    • Accessories/cab side hinge (11).stl
    • Accessories/cab side hinge (2).stl
    • Accessories/cab side hinge (3).stl
    • Accessories/cab side hinge (4).stl
    • Accessories/cab side hinge (5).stl
    • Accessories/cab side hinge (6).stl
    • Accessories/cab side hinge (7).stl
    • Accessories/cab side hinge (8).stl
    • Accessories/cab side hinge (9).stl
    • Accessories/cab side light lens (1).stl
    • Accessories/cab side light lens (2).stl
    • Accessories/cab side light lens (3).stl
    • Accessories/cab side light lens (4).stl
    • Accessories/cab side light lens (5).stl
    • Accessories/cab side light lens (6).stl
    • Accessories/fuel can carriage.stl
    • Accessories/long antenna.stl
    • Accessories/power socket cover.stl
    • Accessories/power socket.stl
    • Accessories/rear visor.stl
    • Accessories/short antenna.stl
    • Accessories/side vent (1).stl
    • Accessories/side vent (2).stl
    • Accessories/tailgate antenna holder.stl
    • Accessories/tailgate multi box lid.stl
    • Accessories/tailgate multi box.stl
    • Accessories/Tall fuel can.stl
    • Accessories/traction board (1).stl
    • Accessories/traction board (2).stl
    • Accessories/traction board guide.stl
    • Accessories/traction board tray door.stl
    • Accessories/traction board tray.stl
    • Battery tray/battery tray.stl
    • Cab/cab body full.stl
    • Cab/cab body split front.stl
    • Cab/cab body split rear.stl
    • Cab/cab front.stl
    • Cab/cab joiner inside (1).stl
    • Cab/cab joiner inside (2).stl
    • Cab/cab joiner outside (1).stl
    • Cab/cab joiner outside (2).stl
    • Cab/cab joiner top.stl
    • Cab/cab rear (for NON rear visor).stl
    • Cab/cab rear (for rear visor).stl
    • Door/door handle.stl
    • Door/door latch.stl
    • Door/door.stl
    • DXF/long window.dxf
    • DXF/short window.dxf
    • DXF/sunroof.dxf
    • DXF/top windows.dxf
    • Fender/split/standard split fender left front.stl
    • Fender/split/standard split fender left rear.stl
    • Fender/split/standard split fender right front.stl
    • Fender/split/standard split fender right rear.stl
    • Fender/split/wide track split fender left front.stl
    • Fender/split/wide track split fender left rear.stl
    • Fender/split/wide track split fender right rear.stl
    • Fender/split/wide track split fender right front.stl
    • Fender/standard fender left.stl
    • Fender/standard fender right.stl
    • Fender/wide track fender left.stl
    • Fender/wide track fender right.stl
    • Mounts/body mount left.stl
    • Mounts/body mount rear.stl
    • Mounts/body mount right.stl
    • Tailight/Tailight (1).stl
    • Tailight/Tailight (2).stl
    • Tailight/tailight lens (1).stl
    • Tailight/tailight lens (2).stl
    • Tailight/tailight lens (3).stl
    • Tailight/tailight lens (4).stl
    • Tailight/tailight lens (5).stl
    • Tailight/tailight lens (6).stl
    • Window/rear window seal.stl
    • Window/window hinge (1).stl
    • Window/window hinge (10).stl
    • Window/window hinge (11).stl
    • Window/window hinge (12).stl
    • Window/window hinge (13).stl
    • Window/window hinge (14).stl
    • Window/window hinge (15).stl
    • Window/window hinge (2).stl
    • Window/window hinge (3).stl
    • Window/window hinge (4).stl
    • Window/window hinge (5).stl
    • Window/window hinge (6).stl
    • Window/window hinge (7).stl
    • Window/window hinge (8).stl
    • Window/window hinge (9).stl

Learn more about the formats
Last update 2023-04-01 at 07:40
Publication date 2022-09-21 at 02:41
Design number 854887
ahead_RC

ahead_RC

Template info

3D model description

PLEASE make sure your 3D printer is able to print a minimum size of 180x235x205mm. before purchasing.

The Cat 1 “Mammoth” was just meant to push the limits of exploring. The new Cat 1 Expedition Cab is here!

If you haven’t seen this awesome build yet, you should check it out here:
https://www.aheadrc.com/custom-builds

The Cat 1 Expedition Cab is an addon attachment for the Crawler Cat 1 “Mammoth”. (Cat 1 Mammoth truck cab SOLD SEPARATELY) The internal volume is currently in our range, by far the largest. This means there’s more space for supplies and luxury, for those extra long expedition trips.

The Cat 1 Mammoth body can be found here: https://cults3d.com/en/3d-model/game/crawler-cat-1-mammoth-1-10-rc-body

It is also designed to be used with the Crawler Cat 1 “Mammoth” with a 420mm wheelbase configuration, and for those who want a more aggressive and wider stance with their Mammoth, the “Wide Track Fenders” for this expedition cab is also included! Whether it be arctic exploration or in full deep mud, we’ve got you covered.

Similar to the Crawler 4320 Expedition Cab, this one is also packed with a ton of interchangeable modular accessories. These mainly being a fuel carriage with fuel can, antenna mount with 2 antennae of different lengths, multi purpose box, rear visor, and more. But the coolest accessory added to this cab are traction boards and an externally mounted functional tray with door, to store 2 traction boards.

There is really a lot of detailing on this cab, including different mock hinges for the windows and mock compartments. Along with that, side vents and a power socket similar to the one from the 4320 Expedition Cab are also designed.

LED lights can be mounted to the cab side and the taillights to make this a truly realistic looking cab. All you will need are; 6x Orange 3mm LED, 2x White 5mm LED, 2x Orange 5mm LED, 2x Red 5mm LED.

The side door can also open and lock as you turn the door handle, small model hinges are required for this to function.

Polycarbonate sheets can be cut according to the included .DXF files and can be mounted in the grooves, which function as the windows! A sunroof is also designed so you get the option to either cover it permanently or open it to let the air in.

Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual

Designed to be printer friendly, the parts come in a variety of included options.

Cab: (Ideal to print in upside down orientation)
Cab full (cab is a 1 piece print. Requires a printer that can print a minimum of 180x235x415mm)
Cab split(splits the cab into 2 halves, a 2 piece print. Requires a printer that can print a minimum of 180x235x205mm)

Fender:
Standard (standard width meant for 240mm width outermost tyre to tyre)
Wide track (meant for 265mm width outermost tyre to tyre)
Full (full length, 1 piece print. Requires a printer that can print a minimum length of 330mm)
Split (split length, 2 piece print. Requires a printer that can print a minimum length of 180mm)

Cab rear panel:
Visor (The rear panel designed for use with the rear visor)
Non visor (The rear panel designed for use without the rear visor)

Rear antenna:
Short (For use with or without the rear visor)
Long (For use without the rear visor)

Some files will need to be printed multiple times, this includes the following:
Cab joiner inside x2
Cab joiner outside x2
Side vent x2
Cab side light lens x6
Cab side hinge x11
Window hinge x15
Tail light x2
Tail light lens x6
Traction board x2

A .zip file containing all the print files is also included for convenience. DXF files for the windows are also included.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Should you need any help, please do not hesitate to contact us!

Manufacturing settings

FDM printing:

Requires a printer that can print a minimum volume of: 180x235x205mm.

PLA+ filament
0.3mm-0.4mm (0.6mm nozzle) layer heights
20-30% infill density
Supports are necessary
Print cab body vertically for less supports

Finished and assembled size:
440*266*175mm (All parts assembled)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.