Gothic Chapel - Halloween candy jar... Or LED Lamp!!!

NOTE: COPYRIGHT PA1© - SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. THIS FILE IS FOR PERSONNAL USE ONLY. LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

A nice gothic chapel, which can be use as a large candy jar or a nice LED lamp/Halloween decoration.

-Easy to print, 100% support free
-No painting: Model is multipart!
-All parts already placed in the right orientation
-Scalable. For PRUSA MINI users, scale the model down by 0.84 (or 84%). Can be scale up any size.
-No screws needed.
-Included assembly instructions with detailed exploded views.

NOTES:

For faster print, use a thick layer height.
I recommend 0.28mm or 0.3mm depending on your slicer/machine. its a nice height for fast prints with a 0.4 nozzle.

TORTURE TEST FILE INCLUDED:

The base of the cross can be a torture test for your printer if you want. It can be printed in normal position, or in torture test position. Both files are identified as so.

The torture test position will launch a print with a very minimal contact surface with the bed and a tough, unbalanced overhang on each side. Perfect bed adhesion and leveling are required to print this part in this orientation. But its possible, i've tried it myself and everything went fine!

IF YOU WANNA USE THE CANDY JAR AS A LED LAMP:

I have enclosed a file called "led supports". They are simple plate with holes for cable ties. They can be glue anywhere inside the chapel. Use them to hold in place you 8mm wide LED strips. Battery operated Led strips are the best for this application.

If you have any questions, just ask!
have fun, post your makes and keep printing my friends!!!

FREE FOR A LIMITED TIME

Layer height between 0.2 and 0.3 depending on your slicer and machine. On creality printers, works well with a 0.28mm layer height.
On prusa printers, 0.3mm is my favorite.

For the infill, i recommand lightning infill at 10-15%, to have just the right amount of supporting infill. The shape of the model can be printed with almost no infill, so lightning infill is perfect for this application.