Lilla Bommen Swedish Skyscraper
$3.50 Lilla Bommen Swedish Skyscraper
3D
Published 2022-09-22T08:46:55+00:00
Intended for 3d print.
This model pack includes a two versions of the Swedish skyscraper " Lilla Bommen ", completed in 1989. There is a model of the skyscraper with a hexagonal base, and one model without base. Suggested use is as scenery in tabletop games, or just as a decoration to put in your bookcase, on your work desk et cetera.
File formats:
The models in this pack are included in both .stl and .obj format. Contact the designer to request additional file formats.
About Lilla Bommen:
Swedish skyscraper, located near the mouth of the river Göta Älv, in the city of Göteborg.
The name translates to Little Boom (a boom is the navigational barriers once used in the harbor area where the skyscraper is located). Lilla Bommen is also the name of the entire city district, leading to some confusion for locals. The building has collected a number of unofficial names over the years, including Skanskaskrapan, Erskineskrapan, Läppstiftet, Vattenståndet et cetera. At the time of its completion in 1989 it was arguably the only skyscraper in Göteborg, but the city has since constructed numerous buildings of equal or greater height. The last couple of years in particular has seen a transformation of the city, with many buildings in the 60-100 metre range added to the skyline. At 86 metres in height, Lilla Bommen will eventually be dwarfed by the 245 metre skyscraper Karlatornet scheduled for completion in 2024.
Lilla Bommen was designed the British-born Swedish architect Ralph Erskine, in collaboration with the architectural firm White. It is primarily an office building, previously housing the main office of Skanska. The design is rather striking, if an acquired taste - Lilla Bommen is intended to resemble a respiratory system, complete with trachea and a pair of lungs. The skyscraper is also painted in a white and red scheme that's reminiscent of blood vessels. Unsurprisingly, the idiosyncratic building has been the subject of both derision and praise from citizens.
Note that Lilla Bommen has a substantial, shorter annex connecting to the skyscraper itself. For the sake of aesthetics and printability, this annex is not present in the models included in this product.
Also note: I am in no way affiliated with Lilla Bommen's current owners Vasakronan, White Architects, the municipality of Göteborg or anyone else involved with Lilla Bommen.
360 degree turntable:
https://www.youtube.com/watch?v=kVWXTSriq-s
High printer settings are recommended, particularly infill percentage (0,08 mm layer height, 20 to 50 percent infill).
Printing time depends entirely on hardware, selected size, selected settings et cetera. A rough estimate is 8 hours printing time for a single model at default scale.
No models are presupported. If getting presupported models are important to you, you can contact me and I'll include presupported versions in the product.
| Date published | 22/09/2022 |
| Price | $3.50 |