Waterproof pill box with secret compartment

Waterproof pill box with three compartments (morning, noon and evening) and a secret compartment to store several banknotes.

Compatible with all euro banknotes as well as all banknotes up to 95 mm in width

Allows you to store needles or safety pins or any other small objects to always have on hand

Three versions of pillbox available

1- Without cache

2- Small cache for just one note

3- Large cache

A visible and tactile indicator on the pillbox in front of the compartments to avoid opening the pillbox the wrong way (the pillbox is held fixed, it is the lid that must turn)

Two versions of lids

1- Simple without caduceus

2- With embossed caduceus

A seal (optional).

A strap (optional).

10/05/2022 New pillbox (large cache large case) + new strap (short for keyring)

The lanyard and the seal are to be printed in TPU, TPE, or any other flexible material (both are optional)

The pillbox and its lid must be printed with a food compatible material (preferably pet, petg or food contact compatible plate) avoid ABS

Because it is not easy to print an O-ring, the seal is flat and threaded

Printed in petg (models in photo) without seal, the pillbox is waterproof even in heavy rain (tested under the shower).

With gasket a night at the bottom of a jump full of water without the slightest trace of moisture

Respect the direction of the stl do not change the face in contact with the tray

0.2 layer, 100% filling

Print your petg warm enough to increase the inter-layer bonding and thus the waterproofness.

ASSEMBLY:

The seal is threaded, it must be screwed on like a nut

Pass the small side of the strap through the loop, then the large side through the loop, pull firmly on it and pass the two shoulders see photos

Gcode files for Prusa MK3S+ available on request

Translated with www.DeepL.com/Translator (free version)

• EN -

Waterproof pill box three compartments (morning, noon and evening) plus a secret compartment to store multiple bills.

Compatible with all euro banknotes as well as all banknotes up to 95 mm in width

allowing to store needles or safety pins or any other small objects to always have on hand

Three versions of pillbox available

1- No hiding place

2- Small hiding place for just a bill

3- Large cache

A tactile indicator is visible and tactile on the pillbox in front of the compartments to avoid an opening in the wrong direction (the pillbox is held fixed, it is the lid that must turn)

Two versions of lids

1- Simple without caduceus

2- With embossed caduceus

A seal (optional).

A wrist strap (optional).

The lanyard and the seal are to be printed in TPU, TPE, or any other soft material (both are optional)

The pillbox and its lid must be printed with a food compatible material (preferably pet, petg or food contact compatible pla) avoid ABS

Because it is not easy to print an O-ring, the seal is flat and threaded

Printed in petg (models in photo) without seal, the pillbox is waterproof even heavy rain (tested under the shower).

With seal a night at the bottom of a jump full of water without the slightest trace moisture

PRINTING TIPS :

Respect the direction of the stl do not change the face in contact with the plate

0.2 layer, 100% filling

Print your petg hot enough to increase the inter-layer bonding and thus the waterproofing.

ASSEMBLY:

The joint is threaded, it must be screwed like a nut

Pass the small side of the strap in the loop, then the large in the loop, pull firmly on it and pass the two shoulders see photos

Gcode files for Prusa MK3S+ available on request

Respect the direction of the stl do not change the face in contact with the tray

0.2 layer, 100% filling

Print your petg warm enough to increase the inter-layer bonding and thus the waterproofness.