HP DPS 750w/1200w power supply cover

DPS 750w or 1200W power supply front cover, incorporating a hole for a 5mm led and a hole for the integration of a switch.

Power supply used for a 12V modelling charger.

I redid a power supply 62 amps from HP server power supply. Light and powerful these power supplies are well suited for RC activity.

The power supply arriving naked, ( no boot bridge, no power cable), I undertook some modifications to adapt it to my RC needs.

I wanted to be able to add an inter, a control led on the front, and screw-in sockets easier to mount than simple 4mm soldered tubes.

You can find on the net different tutorials or videos of hack to make a power supply of this type.

• HP 750W power supply ( easily found on the bon coin or resellers like aliexpress or Bangood, scrutinized the promos to have a good price).

• A switch,

• A 12V led

• A custom designed front panel

• 6 sockets 4 mm to screw. bought at lextronic

the power supply plate has been drilled and the sockets soldered in the lower and upper part

• a 3D black carbon covering

I filled the led hole with hot glue, to reduce the brightness of the led.

Only the lettering remains to be installed.

Once assembled, we get a nice power supply that takes little space in the field box.

Links

HP Supply: https://vu.fr/Nprv

Led 12v: https://vu.fr/TZQt

Switch : https://vu.fr/oMOi

Socket 4mm : https://vu.fr/oSkb

carbon cover : https://vu.fr/DtJC

Creality CR6SE Printer

Eryone matte black filament

Printing speed 100mm/S

initial temperature: 207 degrees

working temperature: 203 degrees

filling: 15 %.

support: Yes, 4%.