caja protectora de figuritas Qatar / Qatar figurines protective box

BEST PROTECTIVE BOX FOR QATAR 2022 FIGURINES

still leave your figurines tied up with a rubber band?

with this protective box your figurines will always look like new!

layer height: 0.2mm

line width: 0.3 - 0.4mm

filling: 10%

is designed to print it complete without using a drop of paint, how?

Print cover:

load the model of both pieces, select them, right click and select "combine models" the pieces will be joined. then select again, right click and select ungroup, the pieces will be separated but each one in its respective place should not have been moved. delete the cover leaving only the letters, print them in the desired color at a height of 0.2mm with a line width of 0.3mm, (export the .gcode). press ctrl + Z and the cover will return, delete the letters and repeat the process but with the cover, IMPORTANT: FOR THE COVER TO PRINT WELL WITHOUT CRASHING WITH THE LETTERS YOU MUST ACT THE JUMP IN Z MINIMUM 1mm.

Print box:

normally like any other part, I recommend printing with layer height 0.2mm.

Large cup printing:

you print 1 or 2 as you like, and stick it on the sides of the box.

Cup printing + lettering:

we do the same as for the cover except that when we are going to print the letters on the background we activate in preferences, general, "drag models to the printing plate automatically" we print the letters next to the file that says "cube" this allows the letters to remain in the air and it is possible to print on top of the background (all layer height 0.3mm).

glue all the pieces in the box and that's it! you have your spectacular figurine box!