Skip to content

RC Dually Adapter

Ecto1.jpg RC Dually Adapter
Ecto2.jpg RC Dually Adapter
Ecto3.jpg RC Dually Adapter
Ecto4.jpg RC Dually Adapter
Ecto5.jpg RC Dually Adapter
Ecto6.jpg RC Dually Adapter
Dually Adapter Thinner.stl RC Dually Adapter
Dually Adapter Thicker.stl RC Dually Adapter
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.2k views
  • 8 likes
  • 42 downloads
License
3D design format
STL Folder details Close
  • Dually Adapter Thicker.stl
  • Dually Adapter Thinner.stl

Learn more about the formats
Publication date 2022-09-30 at 20:01
Design number 866912
atrt

atrt

3D printer file info

3D model description

Adapter to install dual wheels/tires on rear axle.

2 STL's included

Shorter Base - Use m2.5x16mm screws to attach to wheel
Thicker Base - Use m2.5x20mm screws to attach to wheel

Compatible with most 6 lug 1.9 beadlock wheels from Injora, SSD, RC4wd etc.

Instructions:
1. Printed bottom down // PLA // 100% Infill // Supports touching plate only. (Not yet trail tested. ABS or Nylon may be better and/or laying it on its side.
2. Install stub axle into adapter. It is a VERY snug fit. I slightly threaded an m4 nut onto the stub axle and slowly tapped it into place.

a. Amazon link below, accurate as of 9/30/22
b. https://www.amazon.com/dp/B08CD2BLB1?psc=1&ref=ppx_yo2ov_dt_b_product_details
3. Once fully seated, use an m2 screw and nut to hold it in place and help with rotational forces. Length doesn’t matter too much for this. I used a 25mm screw and nut and then cut off the excess with diagonal cutters.
4. Install TRX4 12mm hex on end of stub axle. I used an extended 12mm hub.
5. Remove wheel and tire assembly from the truck.
6. Install ONLY the center hub onto the truck with the m4 locking nut
7. Thread the appropriate length of screws per the model you are using into the adapter.
8. Lineup the screws and attach to the wheel
9. Attach the wheel/tire/adapter assembly to the hub using the 6 m2.5 screws.

3D printing settings

PLA // 190 C // 100% Infill // Bottom Down // Supports touching build plate.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.