Skip to content

Jersey Barrier/curb Mold/Mould for Fingerboard/Tech deck. Resin or FDM printable.

mould2.jpg Jersey Barrier/curb Mold/Mould for Fingerboard/Tech deck. Resin or FDM printable.
mould3.jpg Jersey Barrier/curb Mold/Mould for Fingerboard/Tech deck. Resin or FDM printable.
barrier.jpg Jersey Barrier/curb Mold/Mould for Fingerboard/Tech deck. Resin or FDM printable.
curb.jpg Jersey Barrier/curb Mold/Mould for Fingerboard/Tech deck. Resin or FDM printable.
side1.stl Jersey Barrier/curb Mold/Mould for Fingerboard/Tech deck. Resin or FDM printable.
side2.stl Jersey Barrier/curb Mold/Mould for Fingerboard/Tech deck. Resin or FDM printable.
curb.stl Jersey Barrier/curb Mold/Mould for Fingerboard/Tech deck. Resin or FDM printable.
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.7k views
  • 1 like
  • 1 download
License
3D design format
STL Folder details Close
  • curb.stl
  • side1.stl
  • side2.stl

Learn more about the formats
Publication date 2022-09-30 at 22:32
Design number 867015
Trillfish

Trillfish

3D printer file info

3D model description

Print each side. Can be printed fdm or resin.

To create a Jersey barrier all you need is some cement.

  1. Use some sort of mould release* inside the prints.
  2. Wrap elastic band around moulds to hold together.
  3. Mix up some concrete .
  4. Pour into mould, slightly overfill and tap all over the mould to remove air bubbles.
  5. slowly scrape the cement in a sawing motion to smooth out the bottom (don't stress this too much it can be sanded completely flat.
  6. Leave to cure for 24 hours minimum.
  7. slowly move the 2 mould away from the part. FDM may be slightly more difficult to remove due to the deeper grooves.
  8. Wax up and skate!

Extra steps: (Not a necessity but will make it look/hold together better)
9. Give 2 coats of clear lacquer and leave to set.
Alternately you can paint it with a coat of watered down PVA.

*you can use thinned down Vaseline as mould release. (Thin down with ipa)
or brush on/rub on Vaseline.
Or you can purchase mould release in a spray can.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.