Complete Arrow 3 FPV Drone TPU Body Kit

DESCRIPTION:
This kit is designed to work with the standard Arrow 3 frames, especially with the build from HGLRC. It contains everything you need to protect the drone from the elements. Below is the list of the parts that fit:

• Caddx Ratel
• Any 20x20 stack and VTX
• Crossfire immortal T antenna

The kit contains:
- Turtle mode fin
- Lens protector (Caddx Ratel)
- Crossfire Immortal T mount
- Full body FC and VTX protective plates
- Battery protector tray (for 6s 550mAh batteries)

MEASUREMENTS:
The inner diameter of the lens protector is 15mm. The heigth of the fin is about 28mm.

INSTALLATION:
All the parts can be installed using the original screws the frame came with. You might want to add some extra washers above the TPU to prevent the screws from slipping through.

PRINT:
Use flexible filament to ensure the parts don't break and to provide extra damping for your camera.

NOTES:
If you want to still reach the buttons on your VTX, you need to cut away the TPU around these areas. Otherwise setting up smartaudio fixes this problem. Using the wider arms in the front ensures the lens protector fits without modification.

FILLAMENT USED
Sainsmart 95A blue

NUMBER OF WALLS
6

INFILL PERCENTAGE AND TYPE
20% gyroid

RAFT
No

SUPPORTS NEEDED
No

LAYER HEIGHT
0,2mm