My weekend Project Cost so far Less than $70.00 US
7-2-2020
Just a heads up. I tested many DC and stepper motors, they do good running slow for the turn table, when setup for that, and the DC runs fine in fast rpm for Washing if setup that way. but not both ways with one motor, when you slow the high RPM dc motor down slow enough for the turn table, it is too weak.
I came up with a way to do both with nema 17 motors and a large O-ring for a belt, or you can 3d print a V belt with Flexible filament. I bought some nextion displays 2.4, 3.2 and 3.5 and will do a touch screen too. all existing parts will work for this, except doing the pulleys . I will post these files when I have it working.
6-29-2020
Another Add-On Platform Stand https://www.thingiverse.com/thing:4510900
UPDATE: 6-23-2020
Added: these parts for those with smaller printer (separated the controller from the base, to be mounted with M3 bolts)
Resin-Parts-Washer-TurnTable-Base-Bottom-No-Controller-Panel.stl
Resin-Parts-Washer-Controller-Panel.stl
Added: a PCB Module mount
Resin-Parts-Washer-PCB-Mount.stl
UPDATE: 6-19-2020
Resin Parts Washer cover frame ( up tp 3mm plexglass 1/8 USA) Top two parts bolt together with M3x10mm bolts and nuts. No support needed if you place the parts corectly on the print bed with open sides up.
Add Motor Magnet holder for screws ( when using magnets with holes)
ToDo List: add turntable and UV light options
UPDATE: 6-18-2020
Fixed a lot of issues and improved some parts
* fixed canister being to tight
Resin Parts Washer Basket Tray
https://www.thingiverse.com/thing:4475445
3D Printer Resin Parts Washer DC Motor Programmable Controller
Note: I am still Building and have yet to test, I will post progress as I go.
The magnet Mount for the DC motor takes 2 M3 x 6mm set screws (Grub screws) and nuts, the nuts fit a place mad for the inside the shaft section. I slide them in and used a M3 mm bolt to pull them in place, then remove the bolt and put 6mm set screw in.
https://www.ebay.com/itm/25-Pcs-Hex-Socket-Grub-Screw-M3-x-6mm-/353086741690
Any advice is welcome.
I do not get payed for these links, feel free to get better prices.
12V DC 7RPM to 960RPM High Torque Gear Box Electric Motor
https://www.aliexpress.com/item/32886557485.html
OXO Airtight Food Storage - 4.4 Qt 19.00
https://www.amazon.com/gp/product/B07856RRDW
0~100% Digital PWM Motor Speed Controller DC 12V 24V 36V 48V Time Reversible 40A 19.00
https://www.ebay.com/itm/0-100-Digital-PWM-Motor-Speed-Controller-DC-12V-24V-36V-48V-Time-Reversible-40A/264554120961
Switch 7.00
https://www.ebay.com/itm/5x-SPST-On-Off-Black-Square-I-O-Rocker-Mini-12V-Switch-for-Automotive-Car-Boat/182265764260
5.5mm X 2.1mm Female Metal Panel Mount Socket DC Power Connectors Jack Plug 6.00
https://www.ebay.com/itm/10-5-5mm-X-2-1mm-Female-Metal-Panel-Mount-Socket-DC-Power-Connectors-Jack-Plug/254480973475
Requires gluing Magnets 1/2" x 1/8" Neodymium Need 8
https://www.ebay.com/itm/lot-100-50-1-2-X-1-8-Neodymium-Disc-Strong-Rare-Earth-N48-Small-Fridge-Magnets/182311618618
No gluing Magnets (issue they or not flip-able so can be used on impeller and a turn table, but not on motor, until I can find some with opposite magnetic pull
Strong Countersunk Ring Magnets 1/2" x 1/8" Hole 4mm Rare Earth Neodymium need 8
https://www.ebay.com/itm/50-100-Strong-Countersunk-Ring-Magnets-1-2-x-1-8-Hole-4mm-Rare-Earth-Neodymium/312046693382
(#6) Flat Head Zinc Coated Phillips Head Wood Screws (For magnets with ehe beveled Hole)
https://www.ebay.com/itm/100-Qty-6-x-1-2-Flat-Head-Zinc-Coated-Phillips-Head-Wood-Screws-BCP1/302655628653
M5 X 60mm Flat Head (4) Motor mount
https://www.amazon.com/Prime-Line-9121426-Machine-Phillips-Stainless/dp/B07D5RHNK6
M4 x 12mm (8) For mounting top and bottom cover
https://www.ebay.com/itm/M4-Socket-Head-Cap-Screws-12-9-Alloy-Steel-w-Black-Oxide-DIN-912-0-70-Coarse/123297965237
M3 x 20mm (1) For bolting motor magnet mount to motor shaft
https://www.ebay.com/itm/20-M3-x-20mm-Socket-Head-Caps-Screws-12-9-Alloy-Steel-DIN-912-Coarse-0-5-3mm/110965512286
M3 Lock nut
https://www.amazon.com/uxcell-0-5mm-Insert-Stainless-Finish/dp/B07LF11D7V
https://www.ebay.com/itm/2x-KCD4-Rocker-Switch-Black-DPDT-ON-OFF-ON-6-PIN-16A-250VAC-20A-125VAC-L8E-/313074613785
UV Terminal Jack 5.5 x 2.5 ( diffrent than power in)
https://www.amazon.com/outstanding-5-Pack-Threaded-Connector-Adapter/dp/B07C4F7BP5
5.5 mm x 2.1mm DC Power Jack Socket Female Panel Mount Connector Adapter
https://www.ebay.com/itm/5-5-mm-x-2-1mm-DC-Power-Jack-Socket-Female-Panel-Mount-Connector-Adapter-/392194239385
https://www.amazon.com/outstanding-5-Pack-Threaded-Connector-Adapter/dp/B07C46XMPT
MP1584 3A Adjustable DC Step Down Converter (For 5 volt and 12 volt led lights) added protection for 12 volt led's
https://www.amazon.com/Maxmoral-MP1584EN-Converter-Adjustable-Step-Down/dp/B07RWV51YB
https://www.ebay.com/itm/5pcs-MP1584-3A-Adjustable-DC-Step-Down-Converter-Buck-Module-3-3V-5V-9V-12V-24V/132416728307
(For turntable motor)
1.2-35V DC CC CV Buck Step-Down Converter Power Supply
https://www.ebay.com/itm/300W-9A-7-40V-to-1-2-35V-DC-CC-CV-Buck-Step-Down-Converter-Power-Supply-Adjustab-/253236922841
https://www.aliexpress.com/i/32798380025.html
LED Black Light Strip USB Operated 2M/6.6ft 5V 120 SMD5050 Real Purple LEDs 395nm-405nm Blacklight
https://www.amazon.com/gp/product/B0811HJ65Q
https://www.aliexpress.com/item/32851398731.html
Rocker Switch DPDT
https://www.ebay.com/itm/DPDT-Red-Neon-LED-Backlight-On-Off-On-Rocker-Car-12V-Switch-AC-250V-16A-125V-20A/182626062379
https://www.amazon.com/gp/product/B07HHVFS5V/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Power / LED Switch (optional)
https://www.ebay.com/itm/Red-Green-Light-6Pins-Double-SPST-On-Off-Boat-Switch-16A-250V-AC-20A-125V-sgL8Y/313115004149