CAPTURE THE WITCH - HALOWEEN GAME

This game may be simple, but it's loads of fun. Capture the witch is a spooky spin on the classic tossing contest.

Materials:
- Witch's hat
- Frisbee with a hole in the center

You are able to print all materials and STL files are ready to use. Witch's hat has got 2 variants. 2 or 3 mm thickness.

Instructions;
- Players must stand a set distance away from the witch's hat (stand farther away if playing with only adults; stand closer if playing with children).
- The object of the game is to throw the Frisbee and have it land over the point of the witch's hat.
- Everyone gets three (or five, or ten) tries throwing the Frisbee.
- If the frisbee lands on (or is touching) the hat's brim, five points are awarded.
- If the frisbee lands over the point of the hat, it "captures the witch" and 20 points are awarded.
- The person with the most points after everyone has completed their turns wins the game.

You can use a different point system if you like. There will still be a winner even if no one makes a capture. This game can also be played inside if you have enough space.

• 0,4mm nozzle and 0,2mm layer thickness
• 50mm/s print speed. (please slow down on first layer)
• %100 infill for witch hat.
• %15 infill for frisbee
• you can directly put design into your slicer. -- you don't need to twist or lay down to another surface.
• for better visibility print frisbee with vibrant colors