Automatic feeder 3D print model

The feeder can be used for fish food, shrimp food for cats, dog treats or any other application where tablets and granules are needed. The servo is a standard 9g servo. A Raspberry, Arduino or other servo controller can be used to control it. The diameter of the chambers is 12mm. However, I have attached the .step files so that the feeder can be adapted. The feeder is less suitable for flake food. Flakes can still be used when placing a fish tablet underneath. A push button can also be used to control or programme the servo. The button can be bought on Amazon. (https://www.amazon.com/Momentary-Spring-Return-Self-Return-Pushbutton-Switches/dp/B09DJY5Y5L/ref=sr_1_11?keywords=spst+mini+switch&qid=1660832883&sprefix=spst+min%2Caps%2C152&sr=8-11) You can use 1.75mm filament for the movement of the magazine. No more parts except the servo and controller are needed.