Hawkins Lab Shock Collar Stranger Things Cosplay 3D print model

Collar features:

• options for easier printing for beginners
• options for complicated versions for electronics.
• pre modeled electronics chassis for easy assembly.
• magnetic closures.
• design for stainless steel pin for hinge.
• multiple size blocks for 12-17 neck sizes
• hollow blocks for resin printing
• blocks are interchangeable via slide keys and magnets to lock place

I designed it to be print in place for the main ring. That is for FDM printing and not recommended for resin MSLA or SLA printing. There are separate files for each side if you go with resin.

The neck cube nodes I noticed they used different sized cubes for the actor for #002 then what they use for Eleven. So I assume the collar is the same base prop with removable neck nodes. So I made sure to design different neck cube nodes for sizes 12-17 inch neck sizes. I am a size 15.5and 16 works perfectly. I suggest sizing up. If you need a smaller or larger size let me know. Can't go much larger though so you may need to scale the whole thing. The Neck nodes have keys that glue into the back, as well as a small 1/8x1/8 circular magnet. Those correspond to a slot and magnet spot in the collar. When assembled correctly, the blocks will be able to slide into and lock into place. If you have no desire to change block sizes ever, you can forgo 20 of the small magnets on the hardware list and just glue the blocks in permanently.

The front box has several designs. I made sure to include options where every part is separate for painting and electronics. There are also options where the box is fused if you prefer to just mask areas off. There are options for no inner locators for the electronics, in case you should want to come up with your own electronics design. And Lastly there is an option for a simple box that is all completely fused, do this one only if you just want a quick and easy prop with no electronics.

3D Files are meant as personal use and not to be sold as 3d files.

PM me if you wish to sell finished commissioned pieces or 3d prints!