LXV AIRSOFT CARL GUSTAV ANTI TANK LAUNCHER

A great Swedish launcher has been brought to the airsoft world! This adaptation does not function in the same way as the real counterpart rather it is made to become a beautiful and functional airsoft grenade launcher. It is made for a 40mm airsoft grenades by using self made adapter (I do not provide an adapter as there are many different kinds of grenades and I cant make a single adapter for them all). This means it can launch anything including the well known Taginn rounds. It is a fairly challenging build and I would advise to have some previous experience building similar projects.

Assembly Guide Video:

https://www.youtube.com/watch?v=NeNQ2Bf3FgA

Tools Required:

-Dremel
-Drill
-Drill Bits Set
-Saw
-Flat File
-Various Grit Sanding Paper
-Primer, Paint, Matt Lacquer
-Hex Key Set
-Philips, Flat Screw Driver
-Scissors
-Thread tapping set

Parts Required:

-Part 01: Metal Rain Water Pipe - od.90mm x t.0.8mm x 710mm
(Bilka Downpipe 90mm https://www.bilka.ro/en/gutter-system/)
-Part 02: PVC Pipe od.50mm x 2.0mm x 450mm
-Part 03: Aluminium Pipe od.15mm x 1000mm
-Part 04: od.6mm x 1000mm Electrical Cable

Fasteners Required:

-M2 Bolts 10mm, 20mm
-M3 Bolts 20mm
-M4 Bolts 10mm, 20mm, 40mm
-Spring 0.4mm x 20mm x 5mm
-2x Springs 0.8mm x 25mm x 9mm

Links for various parts provided in the Assembly guide.

Please note that this is an airsoft replica and should be treated as such, no public demonstrations or any other misconduct.

I do not permit resale of either data downloaded or the launcher itself. Please support the creator and if you are making the launcher for someone else purchase another blueprint these kind of projects take a lot of time and resources and I would greatly appreciate this. Thank you.

I have printed this in ASA as it has better temperature resistance and is fairly light this means it will not melt in your car. Some more of the structural parts could benefit from larger infill density, but the beauty of this is that if something break you could just reprint it at better settings and it seems to hold fine on 40% infill.