Skip to content

Filament dry printing chamber

Project3Picture1.JPG Filament dry printing chamber
FILAMENT_ROLL_HOLDER_LHS.png Filament dry printing chamber
FILAMENT_ROLL_HOLDER_-_RHS.png Filament dry printing chamber
FILAMENT_ROLL_HOLDER_SUPPORTED_BRACKET.png Filament dry printing chamber
Project3Picture2.jpg Filament dry printing chamber
Project3Picture3.jpg Filament dry printing chamber
FILAMENT_ROLL_HOLDER_SUPPORTED_BRACKET.stl Filament dry printing chamber
FILAMENT_ROLL_HOLDER_-_BOLT.stl Filament dry printing chamber
FILAMENT_ROLL_HOLDER_LHS.stl Filament dry printing chamber
Pneumatic_Connector.stl Filament dry printing chamber
FILAMENT_ROLL_HOLDER_-_RHS.stl Filament dry printing chamber
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 878 views
  • 2 likes
  • 4 downloads
License
3D design format
Folder details Close
  • FILAMENT_ROLL_HOLDER_-_BOLT.stl
  • FILAMENT_ROLL_HOLDER_-_RHS.stl
  • FILAMENT_ROLL_HOLDER_LHS.stl
  • FILAMENT_ROLL_HOLDER_SUPPORTED_BRACKET.stl
  • Pneumatic_Connector.stl

Learn more about the formats
Publication date 2022-10-18 at 18:30
?
Published to Thingiverse on: 2020-03-07 at 20:04
Design number 890892
looxonline

looxonline

3D printer file info

3D model description

UPDATE 29/04/20:

Try to find a cake container where the lower, inner diameter is around 218mm and the upper, inner diameter is around 232mm. The height should be around 94mm on the inside (excluding any volume in the lid). You can use a thick layer of silicone between the container and the side fitting to buffer any size differences.

I was having issues with some of my prints suffering due to "wet" filament. I designed this to allow me to keep my filament dry regardless of how long a print takes. It is designed to attach to the 2020 extrusions of an ender 5.

I bought a plastic cake container that fits most of my filament rolls, designed a part to attach to it, drilled a hole in the side and we were good to go. Use silicone to glue the part to the side of the cake container.

Once the part has been glued, screw a pneumatic adapter into the top and then you can run PTFE tubes from the adapter directly to the hotend/extruder.

Place a small bag of desiccant in the centre of your spool. The spool will rotate freely within the cake container with hardly any friction.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.