GoPro Remote Control Holder and Sidewall for Snapmaker 2.0 A150

Snapmaker 2.0 A150 GoPro Remote Control Timelapse Mount

Parts required for making Timelapse with GoPro camera and GoPro remote control with Snapmaker 2.0

The holder allows to attach the GoPro remote control on X-Axis
Replicate of sidewall include cylinder for pressing button on the remote control to trigger shooting.

Can be used with all GoPro cameras with the remote. Also allows you to use the photo feature on the GoPro and take a picture every layer then put together to make an amazing Timelapse video.

Post Processing and GCode tweaks are made in Cura software.

6 Included Files-
1. GoPro Remote Holder 1.stl: Supports Needed, (Black PLA),
No Hardware Needed
2. GoPro Remote Holder 2.stl: Supports Needed, (Black PLA),
No Hardware Needed
3. GoPro Remote Holder 3.stl: Supports Needed, (Black PLA),
No Hardware Needed
4. Snapmaker X-Axis Mount.stl: No Supports Needed, (Black PLA),
Hardware: M4 Screws, 4 Small Washers
5. Snapmaker X-Axis Arm.stl: Supports Needed, (Black PLA),
No Hardware Needed(Friction Fit)
6. Snapmaker 3D Printing Button Pusher.stl: No Supports Needed, (Silver PLA),
Replace 3D Printing Module Fan Cover

*Please note that the Snapmaker A150 Enclosure is not needed in order for this to work. If you are using the Enclosure I recommend aligning the Snapmaker Machine all of the way to left inside the Enclosure to ensure minimal friction on the right acrylic side panel

*In addition I used a suction cup mount to hold my GoPro to the inside of the Snapmaker A150 Enclosure

Please if there are questions or ideas to improve the design, let me know.

1. Time Lapse
   Trigger camera command - M240
   Pause Lengs - 700 ms
   Park Print Head - YES
   Park Print Head X - 159 mm
   Park Print Head Y - 160 mm
   Park Feed Rate - 600mm/s

2. Search and Replace
   Search:
   M240 ;Snap Photo
   G4 P700 ;Wait for camera
   Replace:
   My Snap Photo
   G91; Relative
   G0 F1000 X1; Poke
   G4 P500; Wait
   G0 F6000 X-1; Back
   G0 X-159 F5000; To Center
   G90; Absolute

3. Search and Replace
   Search:
   G1 F6000 X159 Y160 ;Park print head
   Replace:
   G0 F6000 X159 Y160 ;Park print head

-