"Here to Slay" Multi-Counter (Action Points & Heroes & Monsters) Incl. tokens

Multi-Counter for the card game "Here to Slay".

So that you always keep track of the hero classes, monsters and the actions points while playing.

Don't forget, when it's your turn again to move the AP token back to "3". Unless you have a card like "Mega Slime" (+1 Actions point) then move it to "4" :)

Also don't forget to use the cubes appropriately for the classes and monsters. ^^

Included are files for:

Multi-Counter

--- tokens (NOT suitable for children under 36 months. (Choking hazard!)) ---

Round To represent the Actions points (2 versions (with and without deepening for coloring))

Dice To represent the hero classes in the group (3 versions (with and without indentation to color + one with indentation on 5 of 6 sides)).

Colors used by me "The Army Painter Warpaints"(Air) and "Kreul" (No advertising, I bought the colors and was/will not be paid for them).

--- Markers/Tokens ---

Round: (Kreul) Acrylic Neon Paint Orange (I had to dilute heavily with water to fill the well with a pipette, then I let the water evaporate, what remained was the visible paint film)

Cubes: (The Army Painter Warpaints) Sapphire Gem(Blue), Greenskin(Green), Lava Orange(Orange), Alien Purple(Purple), Pure Red(Red), Meteor Rock(Yellow), True Copper(Copper Metallic)

Alcohol based paints should also work such as "farber-castell permanent marker 1525", "Edding" and similar (again, no advertising, wasn't/won't get paid for this. With the farber-castell permanent marker 1525(M) I should that it should go, because I have the permanent marker 1523(S) here and have tried that).

I assume no liability for property, property and/or personal damage.

My settings.

Infill: 20%

Layer Height: 0.15mm

Top solid layer: 6

Bottom solid layer: 4

Outline shell: 3

Skirt Outlines: 25 (Helps with the adhesion of the individual parts. :) )

Material: PLA

Extruder Temp: 210°C

Bed Temp: 85-90°C