Skip to content

VESPA GTS300 HPE Kaskaden-LEDs / Cascade LED Mount

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.5k views
  • 3 likes
  • 19 downloads
License
3D design format
Folder details Close
  • Caskade_Mount_red.stl
  • Caskade_Mount_white_green.stl
  • Einbauhinweise_Kaskaden_LED_GTS300_HPE.pdf
  • Kaskade_above_ws2812b.stl
  • Kaskade_below_ws2812b.stl
  • Kaskade_center_ws2812b.stl
  • SwitchCase_V1.stl
  • SwitchCase_V2.stl

Learn more about the formats
Publication date 2022-10-25 at 08:32
?
Published to Thingiverse on: 2021-03-09 at 08:50
Design number 898942
SnakeP

SnakeP

3D printer file info

3D model description

Eine einfache Halterung für LED-Streifen auf der Rückseite der Vespa GTS 300 HPE Cascade.

https://www.youtube.com/watch?v=OZ_2B11Pkh0

Es sollte ein kleiner Step-Down-Wandler vor die LED-Stripes gesetzt werden, der die Spannung auf 11,5V reduziert. Hier z.B.: https://www.amazon.de/gp/product/B0897H22LK/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Geeignete LED-Stripes gibts beispielsweise hier: https://www.amazon.de/gp/product/B018UH2GNI?pf_rd_r=H5ECSP6Z8P9RY7AT690X&pf_rd_p=4ba7735c-ede3-4212-a657-844b25584948&pd_rd_r=1627ad73-2593-44c2-a625-548b4f78d752&pd_rd_w=qC1bd&pd_rd_wg=q1m0A&ref_=pd_gw_unk

Und hier noch ein Wippschalter für das im Download enthaltene kleine Gehäuse. Ich habe ihn im Handschuhfach angebracht:
https://www.amazon.de/VUNIVERSUM-Kippschalter-Wippschalter-Schalter-Modellbau%C2%AE/dp/B07M5QMXDZ/ref=sr_1_16?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=wippschalter&qid=1616838270&s=diy&sr=1-16

04.04.2021 Update:
Angepasste Halter für ws2812b RGB-LED-Strips (12mm breit)
z.B.: https://www.amazon.de/gp/product/B01CDTEJR0/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Für die Ansteuerung benötigt ihr einen StepDown-Wandler (link oben)
Der Ausgang dieses StepDown muss vor dem Verlöten auf 5V eingestellt werden!!!

Für die Ansteuerung des ws2812b LED-Strips benötigt ihr einen ESP-32 oder ESP8266 Microcontroller, beispielsweise einen Wemos D1 Mini
z.B.:
https://www.christians-shop.de/ESP8266-ESP-12-USB-WeMos-D1-Mini-WiFi-Development-Board-einfach-WiFi-integrieren?curr=EUR&gclid=EAIaIQobChMIrIXw-oTl7wIV0QJ7Ch01MAoXEAQYAyABEgIF2vD_BwE

Oder...wer warten kann für kleines Geld bei AliExpress oder diversen Ebay-Shops.

Die Verkabelung und wie ihr den ESP-32 flashen könnt steht sehr gut hier beschrieben:
https://electric-junkie.de/2020/08/wled-quickstart/

Dann könnt Ihr Euch noch die WLED-App für Android oder iOS herunterladen und ihr könnt den ws2812b LED-Strip ansteuern, wie Ihr grade Lust habt.

Nochwas...zum Schutz der Elektronik und der LED-Strips (falls ihr keine wassergeschützten verwenden wollt) empfehle ich Kontakt Chemie PLASTIK:
https://www.amazon.de/KONTAKT-CHEMIE-74309-Schutz-Isolierlack/dp/B001JK9FME/ref=asc_df_B001JK9FME/?tag=googshopde-21&linkCode=df0&hvadid=265521862053&hvpos=&hvnetw=g&hvrand=9237201539900808980&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9042442&hvtargid=pla-446041245035&psc=1&th=1&psc=1

Und natürlich Schrumpfschlauch ;)

Viel Spaß ;)

A simple holder for LED strips on the back of the Vespa GTS 300 HPE Cascade.

A small step-down converter should be placed in front of the LED strips, which reduces the voltage to 11.5V. Here, for example:
https://www.amazon.de/gp/product/B0897H22LK/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Suitable LED strips are available here, for example:
https://www.amazon.de/gp/product/B018UH2GNI?pf_rd_r=H5ECSP6Z8P9RY7AT690X&pf_rd_p=4ba7735c-ede3-4212-a657-844b25584948&pd_rd_r=1627ad73-2593-44c2-a625-548b4f78d752&pd_rd_w=qC1bd&pd_rd_wg=q1m0A&ref_=pd_gw_unk

And here is a rocker switch for the small housing included in the download. I put it in the glove compartment:
https://www.amazon.de/gp/product/B0897H22LK/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

04.04.2021 Update:
Customized holders for ws2812b RGB LED strips (12mm wide)
Such as.:
https://www.amazon.de/gp/product/B01CDTEJR0/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

To control it, you need a StepDown converter (see on top)
The output of this StepDown must be set to 5V before soldering!!!

To control the ws2812b LED strip, you need an ESP-32 or ESP8266 microcontroller, such as a Wemos D1 Mini
Such as.:
https://www.christians-shop.de/ESP8266-ESP-12-USB-WeMos-D1-Mini-WiFi-Development-Board-einfach-WiFi-integrieren?curr=EUR&gclid=EAIaIQobChMIrIXw-oTl7wIV0QJ7Ch01MAoXEAQYAyABEgIF2vD_BwE

Or... who can wait for small money at AliExpress or various Ebay shops.

The wiring and how you can flash the ESP-32 is very well described here:
https://electric-junkie.de/2020/08/wled-quickstart/

Then you can download the WLED app for Android or iOS and you can control the ws2812b LED strip as you would like.

One more thing ... to protect the electronics and the LED strips (if you don't want to use water-protected ones) I recommend Kontakt Chemie PLASTIK:
https://www.amazon.de/KONTAKT-CHEMIE-74309-Schutz-Isolierlack/dp/B001JK9FME/ref=asc_df_B001JK9FME/?tag=googshopde-21&linkCode=df0&hvadid=265521862053&hvpos=&hvnetw=g&hvrand=9237201539900808980&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9042442&hvtargid=pla-446041245035&psc=1&th=1&psc=1

And of course shrink tubing;)

Have fun ;)

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.