Skip to content

Elevated bowl-holder for your fur friend/s

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.1k views
  • 3 likes
  • 8 downloads
  • 1 collection
  • 1 comment
License
3D design format
3MF, STL, TXT, and ZIP Folder details Close
  • 1x 140 separate.stl
  • 1x 140.stl
  • 1x Base140 (separate silhuette and stamp).3mf
  • 1x Base140.3mf
  • 1x Top.3mf
  • 1x Top.stl
  • 1x base170 (separate silhuette and stamp).3mf
  • 1x base170.3mf
  • 2X Top (use this if you can).stl
  • 2x 140 separate.stl
  • 2x 140 separate.stl
  • 2x 140.stl
  • 2x 140.stl
  • 2x 170 separate.stl
  • 2x 170 separate.stl
  • 2x 170.stl
  • 2x Base140 (separate silhuette and stamp) (1).3mf
  • 2x Base140.3mf
  • 2x base (separate silhuette and stamp).3mf
  • 2x base170.3mf
  • 2x top for ender3 (220x220) (1).3mf
  • 2x top for ender3 (220x220).stl
  • 2x top(original - 1th priority if possible).3mf
  • Big textured 1.3mf
  • Big textured 1.stl
  • Big textured 2.3mf
  • Big textured 2.stl
  • Cat silhuette 1x (-0.175).stl
  • Cat silhuette 2x (-0.175).stl
  • Dog silhuette.3mf
  • Elevated bowl-holder for your fur friends.zip
    • 3MF (extreme quality, 8bits printers may get problem)/1x Base (cat only)/1x Base140 (separate silhuette and stamp).3mf
    • 3MF (extreme quality, 8bits printers may get problem)/1x Base (cat only)/1x Base140.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/1x Base (cat only)/1x base170 (separate silhuette and stamp).3mf
    • 3MF (extreme quality, 8bits printers may get problem)/1x Base (cat only)/1x base170.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/1x Top (cat only)/1x Top.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Bases/Cat/2x base (separate silhuette and stamp).3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Bases/Cat/2x Base140 (separate silhuette and stamp) (1).3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Bases/Cat/2x Base140.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Bases/Cat/2x base170.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Bases/Dog/2x Base dog (separate silhuette and paw).3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Bases/Dog/2x Base dog140(separate).3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Bases/Dog/2x Base dog140.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Bases/Dog/2x Base dog170.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Tops/2x top for ender3 (220x220) (1).3mf
    • 3MF (extreme quality, 8bits printers may get problem)/2x Tops/2x top(original - 1th priority if possible).3mf
    • 3MF (extreme quality, 8bits printers may get problem)/Big textured/Big textured 1.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/Big textured/Big textured 2.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/Silhuette and Paw parts/Cat/1x Cat silhuette.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/Silhuette and Paw parts/Cat/2x Cat silhuette.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/Silhuette and Paw parts/Cat/Cat paw.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/Silhuette and Paw parts/Dog/Dog paw.3mf
    • 3MF (extreme quality, 8bits printers may get problem)/Silhuette and Paw parts/Dog/Dog silhuette.3mf
    • Rec settings(read me).txt
    • STL/1x Base (cat only)/1x 140 separate.stl
    • STL/1x Base (cat only)/1x 140.stl
    • STL/1x Base (cat only)/1x 170 separate.stl
    • STL/1x Base (cat only)/1x 170.stl
    • STL/1x Top (cat only)/1x Top.stl
    • STL/2x Bases/Cat/2x 140 separate.stl
    • STL/2x Bases/Cat/2x 140.stl
    • STL/2x Bases/Cat/2x 170 separate.stl
    • STL/2x Bases/Cat/2x 170.stl
    • STL/2x Bases/Dog/2x 140 separate.stl
    • STL/2x Bases/Dog/2x 140.stl
    • STL/2x Bases/Dog/2x 170 separate.stl
    • STL/2x Bases/Dog/2x 170.stl
    • STL/2x Tops/2X Top (use this if you can).stl
    • STL/2x Tops/2x top for ender3 (220x220).stl
    • STL/Big textured one/Big textured 1.stl
    • STL/Big textured one/Big textured 2.stl
    • STL/Silhuette and Paw parts/Cat/Cat silhuette 1x (-0.175).stl
    • STL/Silhuette and Paw parts/Cat/Cat silhuette 2x (-0.175).stl
    • STL/Silhuette and Paw parts/Cat/Stamp(-0.175mm offset each side for fit)).stl
    • STL/Silhuette and Paw parts/Dog/Dog silhuette 1.stl
    • STL/Silhuette and Paw parts/Dog/DogPaw.stl
    • STL/Silhuette and Paw parts/Dog/Dogslihuette 1.1.stl
  • Rec settings(read me).txt

Learn more about the formats
Publication date 2022-10-29 at 18:39
Design number 904453
denisbesir

denisbesir

3D printer file info

3D model description

Adapted for Jula´s 120mm stainless steel bowl. It should also work with Ikea´s 120mm stainless steel bowl, but is not tested.
170mm & 140mm height, measured from the middle of the bowls edge(seen from the side).
Printer dimension needed:
220x220 minimum for the double model and 185x135 for the single model.

Easy printed + No support needed
Model is splited in two parts, one base one top, both oriented to be printed as is.
Optional: use (separate) models instead AND print paws and silhuette alone in other color and glue on after.

If you are unsure about settings needed, check readme file in the download

Why is it good?
- (much less vomits) An elevated food bowl will help overcome the resistance of gravity, making it easier for your cat to swallow its food,
regardless of whether it has a dental issue, neurologic issue, or an upper respiratory infection.
- (comfort) Older cats that may suffer from arthritis find it much more difficult to bend down.
- Angled 15 degrees towards your fur friend, more stable than a alone bowl, and is a nice thing to just see instead alone bowls.
- It will also be higher up for you to place the bowls, if you have back problems or is in a wheelchair you can reach this easier.

Additional custom modification is possible:
-Adding name/text on the model (and choose fonts/ttf - please add link in message if so)
-Adjust height on model
2$

-Other modification ?$?.

You´re welcome write a message to me.

With permission to sell from owner.

3D printing settings

Rec settings 1x 2x:
-Brim 3-5mm
-0.16mm layer height is best to use (If hurry, use 0.2>it starts to print 100% on solid layer infill after 0.24 layer height x 0.44 line width).
-Top 6-7x (1-1.2mm) Bottom 4-5(0.8-1mm)
-3 Walls
-0.44-0.46 line width(110-115% nozzlediameter)

-Infill 8% (Lines) or 15 (Single angle/direction infill-like triangles)

Rec settings BigTextured:

(!)(!)< (slow and hot with zero fan for the first 1-2 first layers)

-Brim 8-12mm
-3 Walls
-0.16-0.2 layer height
-Top 7x (1.2mm) Bottom 6(1mm)

-(if bedslinger) XY Jerk 3-4 / Acceleration 350-450
-0.44 line width(110% nozzlediameter)
-Infill 8-12% (Lines) or 15-20% (Single angle/direction infill)

+Additional for bedslinger users:

Example (adv users rec):
Open your sliced g code in text editor and place this on some layernumber higher up to make the bed
shake the part less / make your successrate much higher on complicated/tall/instable prints:
(M201 https://marlinfw.org/docs/gcode/M201.html - https://marlinfw.org/docs/gcode/M205.html)
;Classic jerk;
M201 X350 Y350 ;
M205 X5 Y5 ;
OR
;Junction devation;
M201 X350 Y350 ;
M205 J0.15 ;

Please, do not let your friend eat from plastic bowls(only dry food if anything)
Model is made for Jula(tested) OR Ikea(not tested but looks equal) 120mm stainless steel bowls.
Praise the plastic sure, but it still contain loads(400>) of unidentified chemicals
we dont even know the long term harm for and our fur friends are sensitive.

Happy printing and i hope you enjoy the print ^^

Categories

Designs › Home › Pets / Food & drink

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.