Elevated bowl-holder for your fur friend/s

Adapted for Jula´s 120mm stainless steel bowl. It should also work with Ikea´s 120mm stainless steel bowl, but is not tested.
170mm & 140mm height, measured from the middle of the bowls edge(seen from the side).
Printer dimension needed:
220x220 minimum for the double model and 185x135 for the single model.

Easy printed + No support needed
Model is splited in two parts, one base one top, both oriented to be printed as is.
Optional: use (separate) models instead AND print paws and silhuette alone in other color and glue on after.

If you are unsure about settings needed, check readme file in the download

Why is it good?
- (much less vomits) An elevated food bowl will help overcome the resistance of gravity, making it easier for your cat to swallow its food,
regardless of whether it has a dental issue, neurologic issue, or an upper respiratory infection.
- (comfort) Older cats that may suffer from arthritis find it much more difficult to bend down.
- Angled 15 degrees towards your fur friend, more stable than a alone bowl, and is a nice thing to just see instead alone bowls.
- It will also be higher up for you to place the bowls, if you have back problems or is in a wheelchair you can reach this easier.

Additional custom modification is possible:
-Adding name/text on the model (and choose fonts/ttf - please add link in message if so)
-Adjust height on model
2$

-Other modification ?$?.

You´re welcome write a message to me.

With permission to sell from owner.

Rec settings 1x 2x:
-Brim 3-5mm
-0.16mm layer height is best to use (If hurry, use 0.2>it starts to print 100% on solid layer infill after 0.24 layer height x 0.44 line width).
-Top 6-7x (1-1.2mm) Bottom 4-5(0.8-1mm)
-3 Walls
-0.44-0.46 line width(110-115% nozzlediameter)

-Infill 8% (Lines) or 15 (Single angle/direction infill-like triangles)

Rec settings BigTextured:

(!)(!)< (slow and hot with zero fan for the first 1-2 first layers)

-Brim 8-12mm
-3 Walls
-0.16-0.2 layer height
-Top 7x (1.2mm) Bottom 6(1mm)

-(if bedslinger) XY Jerk 3-4 / Acceleration 350-450
-0.44 line width(110% nozzlediameter)
-Infill 8-12% (Lines) or 15-20% (Single angle/direction infill)

+Additional for bedslinger users:

Example (adv users rec):
Open your sliced g code in text editor and place this on some layernumber higher up to make the bed
shake the part less / make your successrate much higher on complicated/tall/instable prints:
(M201 https://marlinfw.org/docs/gcode/M201.html - https://marlinfw.org/docs/gcode/M205.html)
;Classic jerk;
M201 X350 Y350 ;
M205 X5 Y5 ;
OR
;Junction devation;
M201 X350 Y350 ;
M205 J0.15 ;

Please, do not let your friend eat from plastic bowls(only dry food if anything)
Model is made for Jula(tested) OR Ikea(not tested but looks equal) 120mm stainless steel bowls.
Praise the plastic sure, but it still contain loads(400>) of unidentified chemicals
we dont even know the long term harm for and our fur friends are sensitive.

Happy printing and i hope you enjoy the print ^^