Skip to content

Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment

4320-6x6-expedition-cab-1.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
4320-6x6-expedition-cab-3.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
1667269138467.jpg Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
1667269138450.jpg Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
1667269138440.jpg Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
1667269138431.jpg Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
1667269138420.jpg Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
6x6-custom-wheelbase-4320-dual-cab-6x6-exped-cab.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
trx6-hauler-4320-dual-cab-6x6-exped-cab.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
4320-6x6-expedition-cab-6.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
4320-6x6-expedition-cab-7.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
4320-6x6-expedition-cab-5.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
4320-6x6-expedition-cab-4.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
4320-6x6-expedition-cab-2.png Crawler 4320 6x6 Expedition Cab - 1/10 RC body attachment
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 5.2k views
  • 12 likes
  • 18 downloads
  • 1 collection
  • 1 comment
License
3D design format
PDF and ZIP Folder details Close
  • UPDATED High Clearance version.zip
    • wall (high clearance version).stl
  • ahead RC 4320 DC Expedition Cab.pdf
  • ahead RC Crawler 4320 6x6 Expedition Cab.zip
    • Window/window hinge-01.stl
    • Window/window hinge-02.stl
    • Window/window hinge-03.stl
    • Window/window hinge-04.stl
    • Window/window hinge-05.stl
    • Window/window hinge-06.stl
    • Window/window hinge-07.stl
    • Window/window hinge-08.stl
    • ahead RC 4320 DC Expedition Cab.pdf
    • cab/cab full.stl
    • cab/cab split front.stl
    • cab/cab split rear.stl
    • cab/fender bridge mount (for full cab).stl
    • cab/fender bridge.stl
    • cab/roof rails/roof rail full left.stl
    • cab/roof rails/roof rail full right.stl
    • cab/roof rails/roof rail rear.stl
    • cab/roof rails/roof rail split left 1.stl
    • cab/roof rails/roof rail split left 2.stl
    • cab/roof rails/roof rail split right 1.stl
    • cab/roof rails/roof rail split right 2.stl
    • cab/split cab joiner-01.stl
    • cab/split cab joiner-02.stl
    • cab/wall.stl
    • Details and accessories/antenna mount.stl
    • Details and accessories/cab light lens-01.stl
    • Details and accessories/cab light lens-02.stl
    • Details and accessories/cab light lens-03.stl
    • Details and accessories/cab light lens-04.stl
    • Details and accessories/cab light lens-05.stl
    • Details and accessories/compartment hinge-01.stl
    • Details and accessories/compartment hinge-02.stl
    • Details and accessories/compartment hinge-03.stl
    • Details and accessories/compartment hinge-04.stl
    • Details and accessories/compartment hinge-05.stl
    • Details and accessories/compartment hinge-06.stl
    • Details and accessories/compartment hinge-07.stl
    • Details and accessories/compartment hinge-08.stl
    • Details and accessories/compartment lid.stl
    • Details and accessories/fuel can carriage.stl
    • Details and accessories/long antenna.stl
    • Details and accessories/power socket cover.stl
    • Details and accessories/power socket.stl
    • Details and accessories/short antenna.stl
    • Details and accessories/side vent-01.stl
    • Details and accessories/side vent-02.stl
    • Details and accessories/tailgate antenna holder.stl
    • Details and accessories/tailgate multi box lid.stl
    • Details and accessories/tailgate multi box.stl
    • Details and accessories/Tall fuel can.stl
    • door/door handle.stl
    • door/door latch.stl
    • door/door.stl
    • DXF/rear door windows.dxf
    • DXF/side doorwindow.dxf
    • DXF/side windows DXF.dxf
    • DXF/sunroof DXF.dxf
    • DXF/upper side windows DXF.dxf
    • Mounts/Crawler 4320 TRX6 cab measure and drill hole aligner mount L.stl
    • Mounts/Crawler 4320 TRX6 cab measure and drill hole aligner R.stl
    • Mounts/Crawler 4320 TRX6 cab mount L.stl
    • Mounts/Crawler 4320 TRX6 cab mount R.stl
    • Mounts/crawler 4320 trx6 combined mount Left.stl
    • Mounts/crawler 4320 trx6 combined mount Right.stl
    • Mounts/Crawler 4320 TRX6 exped cab rear mount.stl
    • Tail light/tailight lens-01.stl
    • Tail light/tailight lens-02.stl
    • Tail light/tailight lens-03.stl
    • Tail light/tailight lens-04.stl
    • Tail light/tailight lens-05.stl
    • Tail light/tailight lens-06.stl
    • Tail light/Tailight-01.stl
    • Tail light/Tailight-02.stl
    • Tailgate/door handle rear.stl
    • Tailgate/tailgate door latch.stl
    • Tailgate/tailgate right door.stl
    • Tailgate/tailgate.stl
    • Tailgate/tailgte left door.stl

Learn more about the formats
Last update 2023-04-27 at 06:05
Publication date 2022-11-01 at 02:39
Design number 907194
ahead_RC

ahead_RC

3D printer file info

3D model description

UPDATE: We've now included a high clearance version of the expedition cab wall to help clear the shifting and rear diff lock servo for the TRX6 chassis.

Built a 6x6 Crawler 4320 or planning to? This is the perfect match! The 6x6 Expedition Cab add-on attachment is just a variant of the popular DC Expedition Cab (for the Crawler 4320 Dual Cab), but built for a 6x6 chassis. (Truck body is sold separately)
https://cults3d.com/en/3d-model/game/crawler-4320-1-10-rc-body
https://cults3d.com/en/3d-model/game/ahead-rc-crawler-4320-dual-cab

The wheelbase is designed for use with Traxxas’ TRX6 platform, i.e. 324mm from front to middle axle, and 130mm from middle axle to rear axle. It is also designed for use with the Crawler 4320 Single Cab for this wheelbase. For convenience TRX6 mounts are also included. The rearmost mount will still need a bit of DIY work as it is meant to be used with a SCX10 ii style rear bumper mount, bolted onto the TRX6 chassis. It may also be required to cut and trim the front wall of the expedition cab to prevent clearance issues. (see pictures)

However it is also possible to use the Crawler 4320 Dual Cab with the 6x6 expedition cab, where the wheelbase will need to be 415mm from front to middle axle, and 130mm from middle to rear axle. Either way, it will be a stunning and a truly unique build!

As for physical dimensions, the 6x6 Expedition Cab and the Expedition Long Cab are the same. But compared to the standard 420mm wheelbase 4x4 configuration for our trucks, the rear axle on a 6x6 is further back. This means departure angle has improved and the same goes for breakover angle due to the middle axle being closer to the front.

As with the Crawler 4320 DC Expedition Cab and the Expedition Long Cab, they all share the same features.

Designed with a ton of details, and 5 slots for cab LED sidelights with lenses, which uses 3mm LED lights. The tail lights are also functional with six 5mm LED lights.

Another feature included is the true functioning door latches for the side and rear double doors. The door latches simply lock and unlock the doors so you won’t have to devise your own door latching system. Hinges are not included though as they will need to be metal to take the beating on the trail.

External compartment lids are included, which means you can actually store things in them providing hinges and an internal storage area is fabricated or sourced. 2 more compartments have been added for more space to put things.

Small details such as the 2 side vents, external power socket and mock hinges are also designed to make the cab look as realistic as possible.

Accessories for mounting onto the rear wall are also provided, and are modular. This means you will be able to switch the accessories around and mount them how you like.

There are 22 cab side window openings, which allow you to mount 8 pieces of clear polycarbonate sheets to simulate the windows. Also a big sunroof! This will no doubt give the suite more natural sunlight.

Last but not least, the roof rails are also fixed in place with M3 screws, meaning they will be strong, allowing you to tie things down onto it, such as our truly extensive range of overlanding accessories!

Assembly instructions:
View the link below to download the assembly instructions (same instruction manual as the “Crawler 4320 DC Expedition Cab”)
https://www.aheadrc.com/manual

A couple of versions are also included for printing optimisation:

Cab
Full dimensions (Requires printer with build volume of at least 205x240x415mm)
Split front and rear (Require printer with build volume of at least 205x240x215mm)

Roof rails
Split
Full length

Some files will need to be printed multiple times, this includes the following:
Tail lights x2
Tail light lenses x6
Window hinges x8
Side compartment hinges x8
Side vents x2
Sidelight lenses x5
Split cab joiner x2

A .zip file containing all the print files is also included for convenience. DXF files for the windows are also included.

The Crawler 4320 6x6 Expedition Cab requires an additional of four M3x10mm screws on top of the ones listed in the manual.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Should you need any help, please do not hesitate to contact us!

3D printing settings

FDM printing:

Requires a printer that can print a minimum volume of: 205x240x215mm.

PLA+ filament
0.3mm-0.4mm (0.6mm nozzle) layer heights
20-30% infill density
Supports are necessary
Print cab body vertically for less supports

Finished and assembled size:
446*235*211mm (All parts assembled)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.