Classic Break action Hammershot

The 3d print files for the Nerf Hammershot mod that transforms it into a break action revolver.
This includes the 3d print files to mod your own nerf hammershot .

(THIS DOES NOT INCLUDE ACTUAL BLASTER, ONLY 3D MODELS)

Brief assembly guide -
- Remove all screws from blaster shell and separate the two halves of the shell
- Remove the internals to focus on the shell
- The shell will need to be cut in line with the black internal section that the stock cylinder rests against, be careful to keep the black section intact while cutting and just cut the outside shell.
- underneath the black inner shell there is an orange portion on the bottom of the shell that will need to be removed so that the mod frontplate can fit
- Now take the removed internals and remove the air restrictor from the front of the plunger tube
- at this point you can take the mod frontplate and begin to wedge the shell pieces with the internals on at a diagonal angle pushing together straight as you clamp the shells together
- finally you can assemble the mod taking the front barrel portion and attaching it to the front plate with a 1/8th inch steel rod and attaching the sear with another piece of the rod (remember to put the springs in place in the recessed portion of the sear and barrel section.

More detailed assembly guide coming soon.