Express LRS printable module cover slim
Express LRS printable module cover slim
Published 2022-09-22T11:53:44+00:00
(I've made all parts free but I do need to cover the cost of the site. If you have found any value in my parts consider donating a dollar. I have a lot more parts to come)
This is a slim version printable case for the express lrs lite module. This version eliminates hollow in the shell where heat can loiter and exposes most of the available are on the heatsink while still protecting you electronics. Designed to play well with the led light in the switch, it has relief cuts on the inside causing designs to glow through the case. Looks great in any resin.
Assembly
Unplug all wire harnesses. Position lcd in place. Slide heatsink in from the side using the smal notches to fasten it in place. Place the main board and sma connector. Place the back of the module and screw together being sure not to pinch any wires.
consider donating a couple dollars so I can keep bringing you parts
The file is programmed in inches. If it appears tiny, to display it correctly multiply the scale by 25.4 this just converts inches/millimeters. Some slicers I have to do this. Its a machinist trick.
Date published | 22/09/2022 |