RBB3 Upgrade Back Plates

These back plates are part of a multi-thing universal upgrade system for Rigidbot Big printers. See the other thing uploads required to complete it as linked below.

These back plates are for upgrading a Rigidbot Big (RBB) with a ReliaBuild 3D (RBB3) 24V ATX style power supply and the new cool running super quiet main board with the 2oz full area heat sink. This two piece upgrade system needs to be printed on a Rigidbot Big printer with a 12" x 16" bed.

Note that the power supply mounting space is moved over toward the center by about 3" to allow for the power supply cables to reach the main board without the extensions required by the three part universal system. Use the tall riser part for use with the new locking cable LCD so that the cable can still reach without the adapter.

This system requires the removal of the lower back bar on the printer frame and insertion of the feet extension and anchors in the corner knuckles. You can find the feet and anchor files in the Regular back plate upgrade system with pictures of the installation here: http://www.thingiverse.com/thing:1712645/#files

The main board cover can be found here: http://www.thingiverse.com/thing:1850924

or here: http://www.thingiverse.com/thing:2172691
Which one you select depends on if you have the I2C add-on board for the Skip-Sense auto skip correction system.

As these are precision fit parts it is highly recommended that you use calibrated filament using the system found here: http://www.thingiverse.com/thing:1037301

-