RB3 Tilted LCD Face Plates

This is a tilted LCD mounting system for RB1's, and RB3's. The system will adapt to Regular and Big versions of both printers. It is also designed to allow the original RB1 LCD to be adapted with the new buttons and cables and allow RB2 components to be completely transferred into the RB3 frame. The LCD case will also fit into the aluminum face plate version for both printer sizes.

The part files include the LCD case, the LCD mounting panel, the RB3 Logo panel, the center expansion panel for the Big version, and bracket braces. The parts are designed to be printed on an RB2 or RB1 10 x 10 bed.

The bracket braces are used for both the printed front plates and the aluminum version. One is needed for the Regular size and two are used for the Big version. They are placed on the bottom rail where the connection seams are for the panels.

The panels are joined using M3 (8mm long) bolts that are common to the printer kit. Pre-threading the bolts into the small holes will greatly simplify the assembly process.

Join the panels before mounting the the LCD screen in the case. Be sure to place the buttons in place before attaching the LCD screen.

All the parts are Cura scaled and oriented for printing. The LCD case tabs are printed at an angle for better strength so they are not flexed across a layer joint.

As these are precision fit parts it is highly recommended that you use calibrated filament using the system found here: http://www.thingiverse.com/thing:1037301

-