Stormtrooper C1 Personal Comlink with Hovimix Pa2 Mictips

Update 9/4/21

**Uploaded the latest modifications to the Hovimix Mictips based on pictures and video of the new foundparts! Please see latest photos for details on the revisions.

** I have also made a taller version of the Mictips for Flat on buildplate printing (SLA). Please request a copy from me. It is completely FREE. **

** If you have purchased this model before the revision I will send the new file to you FREE of charge **
** credits to RSprops for the photo references!

Update 8/21/21
-Excitedy Stoked about the Hovimix Pa2 found parts that recently surfaced!!!
I will be modifying the Hovimix 3d models to get even closer to accuracy based of the new reference photos!

Update 07/23/21
-Print lines on outer body of the Mictips have been smoothened out via scupting software.
If they are still seen under a light with close magnification, not to worry, they will dissapear once primer and paint have been applied.

C1 Imperial Personal Comlink ( ANH, SCOUT, MANDO versions ) / Hovimix pa2 Mictips
(4) FOUR in 1 PROP .STL!

This is a highly detailed screen accurate 3d model.STL of the C1 PERSONAL COMLINK and the STORMTROOPER Aerators / Hovimix Mictips for you to print and enjoy!

This was modeled and designed with an obsessive attention to detail. It faithfully replicates the exact size and dimentions of the screen used props.
The pictures will speak for themselves! UPGRADE YOUR EXISTING PROPS TO IMPROVE ACCURACY!

Comes with options to do (3) Three Comlink variant versions including:

-Ep.IV A New Hope Luke/Stromtrooper
-SCOUT TROOPER/BIKER SCOUT**

-THE MANDALORIAN**
(**as seen in The Mandalorian Chapter 13 REDEMPTION)

Features:

-You can print Stormtrooper Hovimix Mictips and 3 variants of the C1 Personal Comlinks all with one file purchase!

-Correct overall size for screen accuracy ( Comlink size : ANH L-73mm W-30.5mm, SCOUT L-70mm W-30.5mm, MANDO L-78mm W-30.5mm )

-Hovimix Mictips have accurate size and body profile with angled tip. (The Hovimix Mictips are modeled too look screen accurate from the outside view and not modeled as the raw found part.)

-Accurate HOVIMIX Pa2 Lettering, position and font size.

-Two (2) FREE Mictip inner dome file designs for accuracy choice.

-FREE bottom cap design choices for Comlinks (IMPERIAL LOGO or PLAIN for SCOUT and MANDALORIAN versions)

-Comlink Body modeled hollow for options to add electronics and mini-speakers.

-The (4) Mictip side ventholes are modeled with "struts" to assist in printing flat on the buildplate for SLA printers. ( *test printed with SLA printing, FDM is also possible ).
*Strut removal tutorial found in photos.

-Mictip inner dome modeled with 4 ventholes to assist in printing flat on the buildplate to avoid suction force.( thru SLA printing, FDM is also possible )

-Easy assembly for Comlink, just align parts evenly and join together with CA glue or Epoxy. Then add screen mesh cut to shape. ( Measure twice, glue once! )
-For the Hovimix Mictips, just add a (25mm/1") long M3 bolt and nut, glue on the inner dome inside the Mictip, paint, add screen mesh and attach to your bucket!

-Nine (9) Files total!

*** SCREEN MESH NOT INCLUDED! *** (These are easily found online or at a local Hardware. Any stainless steel mesh should do)

This item is a digital download file (STL format) & NOT a physical product. You may download it immediately after purchase!

      *** For any questions, requests, assistance or customization please feel free to send me a message! ***

******* By Purcahsing and Downloading this 3d file you agree to the following terms of use: *******

   - Printing of this file for SELLING or RE-SELLING is prohibited.
   - Buying this 3D file grants a LICENSE FOR PRIVATE / PERSONAL USE ONLY.       
   - Use of this file for any commercial use is prohibited.
   - NOT FOR SHARING, RE-SALE, in any way, shape or form.

******* THIS IS NOT AN OFFICIALLY LICENSED FILE and ONLY CONSIDERED FAN ART./ FAN ART is under FAIR USE. *******
* This 3D FILE is sculpted and created by SUPER ELITE PROPS *

                       Follow me @ ARTSTATION! https://dioronin9.artstation.com/
                           and on   INSTAGRAM & FACEBOOK as SUPERELITEPROPS
                                                          HAPPY PRINTING!!!! :)

TECHNICAL SIZE SPECS for Printing

-These files are already modeled and sized correctly when downloaded. These sizes are only for manual reference.
( All sizes are for the X diameter )

Mictip Head - 23.1mm
Mictip inner dome - 16mm
Comlink Body Cylinder - 30.5mm
Comlink bottom caps - 19.25mm

**Test printed with an SLA printer with a .05 Layer Height and Lift speeds of 45mm