Danish christmas hearts

These are paper thin 3d printed sheets that you can fold and braid/weave together and make your own christmas hearts. This is a tradition that we danes do at chritsmas, only its usually in paper we make them, they are called "julehjerter". So i thought maybe i could make them 3d printed and then they would not be destroyed as easy as the paper ones.
Danish kids love to make these and other paper things for the christmas tree. We put cookies called peppernuts or pebbernødder in them or candy/wrapped chocolates, and on christmas eve the kids get to "raid" the tree, and eat it all :-)
As a kid we would try and sneak some of the things out of there and eat without the grownups knowing ^^ oh the memories..... :-D
Well I hope you will enjoy making your own memories and have the most wonderful time!

Important when buying the design:
This is my design and copyight to me sassiecat3d, it's not to be used commercially or resold without my permission, the stl file is under the same clause, not to be re-sold or use commercially without my permission. You are welcome to contact me if you would like to know more. :-) You agree to these terms when you purchace this file.

For buying the commercial version where you can print and sell copys of a physical 3d printed version, go here:
https://cults3d.com/en/3d-model/art/danish-christmas-hearts-commercial-version

I used a .4mm nozzle, .1mm layer height, and 1 wall is reccommended.
I use a zig zag printing pattern, and i put the prints at a 45 degree angle on the printplate when printing them.

Heres a link to my tik tok, where you can see how i braid them:
https://www.tiktok.com/@sassiecat3d/video/7164066582447148293?is_copy_url=1&is_from_webapp=v1

Make sure your printer is all set with a good calibration and retraction before printing it.