Back Horn Speaker V4.0 Wall Mount

Back Horn Speaker V4.0 Wall Mount

First, I really hope you like the design and find it useful. If you feel like tipping PLEASE donate to UKRAINE (or any other people in need). There is a cold winter ahead and these people will need any help they can get! THANKS!!

Upon multiple request here is the wall mount for the fully printable Back Horn Speaker V4.0. This speaker also works great in a 2.1 setup (use 2 back horn speakers V2 or V4, the isobaric subwoofer and the 2.1 amplifier).

• The complete fully printable 2.1 setup: https://www.instructables.com/21-Bluetooth-Sound-System-Fully-Printable

• Back Horn Speaker V4: https://www.thingiverse.com/thing:4731920

• Isobaric Subwoofer: https://www.thingiverse.com/thing:4765663

• The 2.1 amplifier: https://www.thingiverse.com/thing:4743037

FILAMENT
- You've guessed it (at least if you have seen my other designs), I print the body using a cheap and incredibly easy to print Carbon Fiber PLA , which gives this beautiful soft touch and semi-gloss shine,
- alternatively in Silk Silver, Bronze, or Copper.

PRINTING
Printing is super easy. Print at 0.2+ resolution and with approx. 30%+ infill. No supports or build plate adhesion needed.

MOUNTING
Use 3 countersunk screws (mounting holes are 5.2 mm) to mount to the wall and 2 short M3 screws to mount the speaker to the wall mount (screws should fit the holes in the speaker base, so no need to drill).

HOPE YOU LIKE IT, AND IF YOU LIKE THEM, PLEASE LIKE IT. THANKS!

Enjoy and happy printing!

-