War hammer 4TK Movement Tray - 25mm bases + 50mm Heavy Weapons Team | Imperial Guard

Modular, magnetisable, Pre-textured/Plain hexagonal-based movement trays.

This is the new variation of my movement tray for 25 mm, 50mm and 65 mm-based models. These versions have flat bottoms and allow for vertical supports, making printing much easier. Also does away with the need for the joiner modules.

Glue the bases together in any configuration you need. Keep bases separate or join together as one!

The files included in this download allow for the new 50mm Imperial Guard heavy weapons team - and includes the old 7-man file that accommodates the 65mm heavy weapon team bases from my free version found on my cults page.

The pinch handle is an optional extra that allows cards or order tokens to be slotted in the top for status effects and has a base that can act as a wound caddy, or be decorated.

Magnet holes fit 3x2mm magnets.

Files included:(Arrange in many configurations - use glue and magnets)

Non - Textured:
- 7-man module/65mm Base
- 4-man module/50mm base+1man
- 1-man module+50mm base
- 1-man module.
- 3-man module straight
- 3-man module grouped
- 2-man module

Textured:
- 7-man module/65mm Base
- 4-man module/50mm base+1man
- 1-man module+50mm base
- 1-man module.
- 3-man module straight
- 3-man module grouped
- 2-man module

• Pinch move handle module.(holds cards)

• Pinch move handle module v2 (holds order tokens)

• Order Tokens!: (Regimental + Prefect)

• Supported files

Printed on an Anycubic Mono SE:

Chitchubox settings:

Layer Height:0.05
Bottom Layer Count: 6
Exposure Time: 1.5
Bottom Exposure Time: 30
Light-off Delay:0.5
Bottom Light-off Delay: 0.5
Bottom Lift Distance: 8
Lifting Distance: 6
Bottom Lift Speed: 120mm/min
Lifting Speed: 120mm/min
Retract Speed: 240mm/min

Resin: Elegoo Water Washable
About 4 hours.