Soap of Captain America Shield

A base model to make molds and soaps.
This model has been tested as a based model to make molds and glycerin soaps in stores in Brazil.

Versions included
- A design of the shield- Default
- A design of the shield with a base.
- A wall to fit the base.

- If you need another size, you can change on the print slicer of your choice.

Instructions:
1. If you want to make a refined mold print the model with the base, use a wet sandpaper with greater grades first and smaller grades after to have a smooth soap base which will be used to make a mold.
2. For Resin Printers and smooth with acetone or isopropyl alcohol print only the shield without base and glue the printed part on an vinyl and print the wall to to make the mold.
3. I recommend use of a silicone mold release agent.
4. Enjoy!

Soap Size: 65 x 65 x 23 mm
soap weight: 60g or 2,11Oz
Don’t forget to post your makes!

Required build volume: 100 x100 x 50 mm
Material usage: 53g 20.07m
Print time: 8h

Material: ABS or Resin preferably.
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 1,6 mm
Outer walls: 3
Top walls: 6 - minimum
Infill: 10%
Build plate adhesion type: a good one for ABS.
If you experience any problems, please feel free to contact me on