Skip to content

Derelict damaged space ship compatible Killer team or Hulks out in space or action of boarding games

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (14 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 66.3k views
  • 754 likes
  • 976 downloads
  • 25 collections
  • 44 comments
  • 4 makes
License
3D design format
STL and ZIP Folder details Close
  • Apparatuses Set_1.zip
    • broken pipe.stl
    • C1.stl
    • C1_Hollow.stl
    • C2.stl
    • C3.stl
    • C4.stl
    • C5.stl
    • Easy print for FDM/Broken pipe_FDM clip off the under support.stl
    • Easy print for FDM/Overhead pipe_FDM print upside down and clip off side support.stl
    • Overhead pipe.stl
    • Resin print/Broken_pipe.stl
    • Resin print/C2.stl
    • Resin print/C3.stl
    • Resin print/C4.stl
    • Resin print/C5.stl
    • Resin print/Overhead_pipe.stl
    • Resin print/Supported/Broken_pipe.stl
    • Resin print/Supported/C1 hollow.stl
    • Resin print/Supported/C2.stl
    • Resin print/Supported/C3.stl
    • Resin print/Supported/C5.stl
    • Resin print/Supported/Overhead_pipe.stl
    • Resin print/Supported/Set_1.lys
    • Resin print/Supported/Valve for C3 and C5_Print 2.stl
    • Valve for C3 and C5.stl
  • Apparatuses Set_2.zip
    • Bomb hollow.stl
    • Bomb.stl
    • For Resin/Gun_wall.stl
    • For Resin/skull_aparatus.stl
    • For Resin/spotlight.stl
    • For Resin/Supported/Bomb.stl
    • For Resin/Supported/gun pile_1.stl
    • For Resin/Supported/Gun_wall.stl
    • For Resin/Supported/Set 2.lys
    • For Resin/Supported/skull_aparatus.stl
    • For Resin/Supported/spotlight.stl
    • gun pile_1.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Body_does_need_basic_supports.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_left_1.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_left_2.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_right_1.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_right_2.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Hitch_print_4.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Leg_left.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Leg_right.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Scope_1.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Scope_2.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Wheel_left.stl
    • Gun Robot/Easy cut for FDM/Gun Robot_4-Wheel_right.stl
    • Gun Robot/Gun Robot_4-Body.stl
    • Gun Robot/Gun Robot_4-Gun_Left.stl
    • Gun Robot/Gun Robot_4-Gun_right.stl
    • Gun Robot/Gun Robot_4-Scope.stl
    • Gun Robot/Supported for resin/Body.stl
    • Gun Robot/Supported for resin/Gun_Left.stl
    • Gun Robot/Supported for resin/Gun_Right.stl
    • Gun Robot/Supported for resin/Scope.stl
    • Gun wall.stl
    • Saw Robot/Easy cut FDM/Robot_1_EasyFDM.stl
    • Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_magnet_1.stl
    • Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_magnet_2.stl
    • Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_pin_1.stl
    • Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_pin_2.stl
    • Saw Robot/Robot_1.stl
    • Saw Robot/Robot_1-Resin_saw_magnet.stl
    • Saw Robot/Robot_1-Resin_saw_with_pin.stl
    • Saw Robot/Robot_1-saw_base.stl
    • Saw Robot/Robot_1-saw_pin.stl
    • Saw Robot/Supported for resin/Body.stl
    • Saw Robot/Supported for resin/Saw base.stl
    • Saw Robot/Supported for resin/Saw pin.stl
    • Saw Robot/Supported for resin/Saw with magnet hole.stl
    • Saw Robot/Supported for resin/Saw with pin.stl
    • skull aparatus.stl
    • spotlight FDM.stl
    • spotlight.stl
  • Apparatuses Set_3.zip
    • Blast_Wall_1_001.stl
    • Blast_Wall_1_002.stl
    • blast_wall_2_001.stl
    • blast_wall_2_002.stl
    • Control_panel_1_001.stl
    • Control_panel_1_002.stl
    • Control_panel_2_001.stl
    • Control_panel_2_002.stl
    • Control_panel_3_001.stl
    • Control_panel_3_002.stl
    • Control_panel_3_003.stl
    • Control_panel_3_004.stl
    • Control_panel_leg_Print 6.stl
    • door brace-door_brace.stl
    • FDM alt/door brace-door_brace_FDM.stl
    • FDM alt/Hollowdeck_002_Print2.stl
    • FDM alt/Hollowdeck_004.stl
    • Hollowdeck_001.stl
    • Hollowdeck_003_Print2.stl
    • Hollowdeck_007_Print4.stl
    • Hollowdeck_018_print2.stl
    • Hollowdeck_019_Print2.stl
    • Supported/apparatus_3 supported.lys
    • Supported/apparatus_3 supported.pm3m
    • Supported/apparatus_3 supported_autosave/apparatus_3 supported_2023-05-25_15-38-39.lyt
    • Supported/apparatus_3 supported_autosave/apparatus_3 supported_2023-05-25_15-41-46.lyt
    • Supported/apparatus_3 supported_autosave/apparatus_3 supported_2023-05-25_15-48-54.lyt
    • Supported/apparatus_3 supported_autosave/apparatus_3 supported_2023-05-25_15-51-55.lyt
    • Supported/apparatus_3 supported_autosave/apparatus_3 supported_2023-05-25_16-31-15.lyt
    • Supported/Blast_Wall_1_001.stl
    • Supported/Blast_Wall_1_002.stl
    • Supported/blast_wall_2_001.stl
    • Supported/blast_wall_2_002.stl
    • Supported/Control_panel_1_001.stl
    • Supported/Control_panel_1_002.stl
    • Supported/Control_panel_2_001.stl
    • Supported/Control_panel_2_002.stl
    • Supported/Control_panel_3_001.stl
    • Supported/Control_panel_3_002.stl
    • Supported/Control_panel_3_003.stl
    • Supported/Control_panel_3_004.stl
    • Supported/Control_panel_leg.stl
    • Supported/door brace-door_brace.stl
    • Supported/Hollowdeck_001.stl
    • Supported/Hollowdeck_003.stl
    • Supported/Hollowdeck_007.stl
    • Supported/Hollowdeck_018.stl
    • Supported/Hollowdeck_019.stl
  • Apparatuses Set_4.zip
    • FDM STL/aurtopsytable_3.stl
    • FDM STL/autopsytable_1.stl
    • FDM STL/autopsytable_2.stl
    • FDM STL/autopsytable_4.stl
    • FDM STL/escapepod_1.stl
    • FDM STL/escapepod_2.stl
    • FDM STL/Ironlung_1.stl
    • FDM STL/Ironlung_2.stl
    • FDM STL/Ironlung_3.stl
    • FDM STL/Ironlung_4.stl
    • FDM STL/medical supplies_1.stl
    • FDM STL/medical supplies_2.stl
    • FDM STL/Medical supplies_3.stl
    • FDM STL/Medical supplies_4.stl
    • FDM STL/Stasis.stl
    • FDM STL/stasis_2.stl
    • FDM STL/Surgcal chair_5.stl
    • FDM STL/Surgical chai_4.stl
    • FDM STL/Surgical chair_1.stl
    • FDM STL/Surgical chair_2.stl
    • FDM STL/Surgical chair_3.stl
    • Resin STL/autopsy_table_1.stl
    • Resin STL/autopsy_table_2.stl
    • Resin STL/chair_1.stl
    • Resin STL/chair_2.stl
    • Resin STL/chair_3.stl
    • Resin STL/escape_pod_1.stl
    • Resin STL/escape_pod_2.stl
    • Resin STL/escape_pod_3.stl
    • Resin STL/Iron lung.stl
    • Resin STL/medical supplies.stl
    • Resin STL/stasis_1.stl
    • Resin STL/stasis_2.stl
    • Resin STL/Supported/2x set4.lys
    • Resin STL/Supported/2x set4.pm3m
    • Resin STL/Supported/autopsy_table_1.stl
    • Resin STL/Supported/autopsy_table_2.stl
    • Resin STL/Supported/chair_1.stl
    • Resin STL/Supported/chair_2.stl
    • Resin STL/Supported/chair_3.stl
    • Resin STL/Supported/escape_pod_1.stl
    • Resin STL/Supported/escape_pod_2.stl
    • Resin STL/Supported/escape_pod_3.stl
    • Resin STL/Supported/Iron lung.stl
    • Resin STL/Supported/medical supplies.stl
    • Resin STL/Supported/stasis_1.stl
    • Resin STL/Supported/stasis_2.stl
  • Barricades.zip
    • Barricade_1.stl
    • Barricade_2.stl
    • Barricade_3_1.stl
    • Barricade_3_2.stl
    • For Resin/Barricade_3_1_Hollow.stl
    • For Resin/Barricade_3_2_Hollow.stl
    • For Resin/Support for Resin/Barricade_1.lys
    • For Resin/Support for Resin/Barricade_1.stl
    • For Resin/Support for Resin/Barricade_2.stl
    • For Resin/Support for Resin/Barricade_3_1.stl
    • For Resin/Support for Resin/Barricade_3_2.stl
  • Bases 25-80mm.zip
    • 25mm/25mm-Base.stl
    • 25mm/25mm-Base_001.stl
    • 25mm/25mm-Base_002.stl
    • 25mm/25mm-Base_003.stl
    • 25mm/25mm-Base_004.stl
    • 25mm/25mm-Base_005.stl
    • 25mm/25mm-Base_006.stl
    • 25mm/25mm-Base_007.stl
    • 25mm/25mm-Base_008.stl
    • 25mm/25mm-Base_009.stl
    • 25mm/25mm-Base_010.stl
    • 25mm/25mm-Base_011.stl
    • 25mm/25mm-Base_012.stl
    • 25mm/25mm-Base_013.stl
    • 25mm/25mm-Base_014.stl
    • 25mm/25mm-Base_015.stl
    • 25mm/25mm-Base_016.stl
    • 25mm/25mm-Base_017.stl
    • 25mm/25mm-Base_018.stl
    • 25mm/25mm-Base_019.stl
    • 25mm/25mm-Base_020.stl
    • 25mm/25mm-Base_021.stl
    • 25mm/25mm-Base_022.stl
    • 25mm/25mm-Base_023.stl
    • 25mm/25mm-Base_024.stl
    • 25mm/25mm-Base_025.stl
    • 25mm/25mm-Base_026.stl
    • 25mm/25mm-Base_027.stl
    • 25mm/Topper/25mm-Topper.stl
    • 25mm/Topper/25mm-Topper_001.stl
    • 25mm/Topper/25mm-Topper_002.stl
    • 25mm/Topper/25mm-Topper_003.stl
    • 25mm/Topper/25mm-Topper_004.stl
    • 25mm/Topper/25mm-Topper_005.stl
    • 25mm/Topper/25mm-Topper_006.stl
    • 25mm/Topper/25mm-Topper_007.stl
    • 25mm/Topper/25mm-Topper_008.stl
    • 25mm/Topper/25mm-Topper_009.stl
    • 25mm/Topper/25mm-Topper_010.stl
    • 25mm/Topper/25mm-Topper_011.stl
    • 25mm/Topper/25mm-Topper_012.stl
    • 25mm/Topper/25mm-Topper_013.stl
    • 25mm/Topper/25mm-Topper_014.stl
    • 25mm/Topper/25mm-Topper_015.stl
    • 25mm/Topper/25mm-Topper_016.stl
    • 25mm/Topper/25mm-Topper_017.stl
    • 25mm/Topper/25mm-Topper_018.stl
    • 25mm/Topper/25mm-Topper_019.stl
    • 25mm/Topper/25mm-Topper_020.stl
    • 25mm/Topper/25mm-Topper_021.stl
    • 25mm/Topper/25mm-Topper_022.stl
    • 25mm/Topper/25mm-Topper_023.stl
    • 25mm/Topper/25mm-Topper_024.stl
    • 25mm/Topper/25mm-Topper_025.stl
    • 25mm/Topper/25mm-Topper_026.stl
    • 28mm/28mm-base_001.stl
    • 28mm/28mm-base_002.stl
    • 28mm/28mm-base_003.stl
    • 28mm/28mm-base_004.stl
    • 28mm/28mm-base_005.stl
    • 28mm/28mm-base_006.stl
    • 28mm/28mm-base_007.stl
    • 28mm/28mm-base_008.stl
    • 28mm/28mm-base_009.stl
    • 28mm/28mm-base_010.stl
    • 28mm/28mm-base_011.stl
    • 28mm/28mm-base_012.stl
    • 28mm/28mm-base_013.stl
    • 28mm/28mm-base_014.stl
    • 28mm/28mm-base_015.stl
    • 28mm/28mm-base_016.stl
    • 28mm/28mm-base_020.stl
    • 28mm/28mm-base_021.stl
    • 28mm/28mm-base_022.stl
    • 28mm/28mm-base_023.stl
    • 28mm/28mm-base_024.stl
    • 28mm/28mm-base_025.stl
    • 28mm/28mm-base_026.stl
    • 28mm/28mm-base_027.stl
    • 28mm/28mm-base_028.stl
    • 28mm/28mm-base_029.stl
    • 28mm/Toppers/28mm-topper_001.stl
    • 28mm/Toppers/28mm-topper_002.stl
    • 28mm/Toppers/28mm-topper_003.stl
    • 28mm/Toppers/28mm-topper_004.stl
    • 28mm/Toppers/28mm-topper_005.stl
    • 28mm/Toppers/28mm-topper_006.stl
    • 28mm/Toppers/28mm-topper_007.stl
    • 28mm/Toppers/28mm-topper_008.stl
    • 28mm/Toppers/28mm-topper_009.stl
    • 28mm/Toppers/28mm-topper_010.stl
    • 28mm/Toppers/28mm-topper_011.stl
    • 28mm/Toppers/28mm-topper_012.stl
    • 28mm/Toppers/28mm-topper_013.stl
    • 28mm/Toppers/28mm-topper_014.stl
    • 28mm/Toppers/28mm-topper_015.stl
    • 28mm/Toppers/28mm-topper_016.stl
    • 28mm/Toppers/28mm-topper_017.stl
    • 28mm/Toppers/28mm-topper_018.stl
    • 28mm/Toppers/28mm-topper_019.stl
    • 28mm/Toppers/28mm-topper_020.stl
    • 28mm/Toppers/28mm-topper_021.stl
    • 28mm/Toppers/28mm-topper_022.stl
    • 28mm/Toppers/28mm-topper_023.stl
    • 28mm/Toppers/28mm-topper_024.stl
    • 28mm/Toppers/28mm-topper_025.stl
    • 28mm/Toppers/28mm-topper_028.stl
    • 28mm/Toppers/28mm-topper_029.stl
    • 32mm/32mm-Base_001.stl
    • 32mm/32mm-Base_002.stl
    • 32mm/32mm-Base_003.stl
    • 32mm/32mm-Base_004.stl
    • 32mm/32mm-Base_005.stl
    • 32mm/32mm-Base_006.stl
    • 32mm/32mm-Base_007.stl
    • 32mm/32mm-Base_008.stl
    • 32mm/32mm-Base_009.stl
    • 32mm/32mm-Base_010.stl
    • 32mm/32mm-Base_011.stl
    • 32mm/32mm-Base_012.stl
    • 32mm/32mm-Base_013.stl
    • 32mm/32mm-Base_014.stl
    • 32mm/32mm-Base_015.stl
    • 32mm/32mm-Base_016.stl
    • 32mm/32mm-Base_017.stl
    • 32mm/32mm-Base_018.stl
    • 32mm/32mm-Base_019.stl
    • 32mm/32mm-Base_020.stl
    • 32mm/32mm-Base_021.stl
    • 32mm/32mm-Base_022.stl
    • 32mm/32mm-Base_023.stl
    • 32mm/32mm-Base_024.stl
    • 32mm/32mm-Base_025.stl
    • 32mm/32mm-Base_026.stl
    • 32mm/Topper/32mm-Toppers_001.stl
    • 32mm/Topper/32mm-Toppers_003.stl
    • 32mm/Topper/32mm-Toppers_004.stl
    • 32mm/Topper/32mm-Toppers_005.stl
    • 32mm/Topper/32mm-Toppers_006.stl
    • 32mm/Topper/32mm-Toppers_007.stl
    • 32mm/Topper/32mm-Toppers_008.stl
    • 32mm/Topper/32mm-Toppers_009.stl
    • 32mm/Topper/32mm-Toppers_010.stl
    • 32mm/Topper/32mm-Toppers_011.stl
    • 32mm/Topper/32mm-Toppers_012.stl
    • 32mm/Topper/32mm-Toppers_013.stl
    • 32mm/Topper/32mm-Toppers_016.stl
    • 32mm/Topper/32mm-Toppers_017.stl
    • 32mm/Topper/32mm-Toppers_018.stl
    • 32mm/Topper/32mm-Toppers_019.stl
    • 32mm/Topper/32mm-Toppers_020.stl
    • 32mm/Topper/32mm-Toppers_021.stl
    • 32mm/Topper/32mm-Toppers_022.stl
    • 32mm/Topper/32mm-Toppers_023.stl
    • 32mm/Topper/32mm-Toppers_024.stl
    • 32mm/Topper/32mm-Toppers_025.stl
    • 32mm/Topper/32mm-Toppers_026.stl
    • 32mm/Topper/32mm-Toppers_027.stl
    • 32mm/Topper/32mm-Toppers_028.stl
    • 32mm/Topper/32mm-Toppers_029.stl
    • 40mm/40mm-Bases_001.stl
    • 40mm/40mm-Bases_002.stl
    • 40mm/40mm-Bases_003.stl
    • 40mm/40mm-Bases_004.stl
    • 40mm/40mm-Bases_005.stl
    • 40mm/40mm-Bases_006.stl
    • 40mm/40mm-Bases_007.stl
    • 40mm/40mm-Bases_008.stl
    • 40mm/40mm-Bases_009.stl
    • 40mm/40mm-Bases_010.stl
    • 40mm/40mm-Bases_011.stl
    • 40mm/40mm-Bases_012.stl
    • 40mm/40mm-Bases_013.stl
    • 40mm/40mm-Bases_014.stl
    • 40mm/40mm-Bases_015.stl
    • 40mm/40mm-Bases_016.stl
    • 40mm/40mm-Bases_018.stl
    • 40mm/40mm-Bases_019.stl
    • 40mm/40mm-Bases_020.stl
    • 40mm/Toppers/40mm-Toppers_001.stl
    • 40mm/Toppers/40mm-Toppers_002.stl
    • 40mm/Toppers/40mm-Toppers_003.stl
    • 40mm/Toppers/40mm-Toppers_004.stl
    • 40mm/Toppers/40mm-Toppers_005.stl
    • 40mm/Toppers/40mm-Toppers_006.stl
    • 40mm/Toppers/40mm-Toppers_007.stl
    • 40mm/Toppers/40mm-Toppers_008.stl
    • 40mm/Toppers/40mm-Toppers_010.stl
    • 40mm/Toppers/40mm-Toppers_011.stl
    • 40mm/Toppers/40mm-Toppers_012.stl
    • 40mm/Toppers/40mm-Toppers_013.stl
    • 40mm/Toppers/40mm-Toppers_014.stl
    • 40mm/Toppers/40mm-Toppers_015.stl
    • 40mm/Toppers/40mm-Toppers_016.stl
    • 40mm/Toppers/40mm-Toppers_019.stl
    • 40mm/Toppers/40mm-Toppers_020.stl
    • 40mm/Toppers/40mm-Toppers_021.stl
    • 40mm/Toppers/40mm-Toppers_022.stl
    • 50mm/50mm-Base_001.stl
    • 50mm/50mm-Base_002.stl
    • 50mm/50mm-Base_003.stl
    • 50mm/50mm-Base_004.stl
    • 50mm/50mm-Base_005.stl
    • 50mm/50mm-Base_006.stl
    • 50mm/50mm-Base_007.stl
    • 50mm/50mm-Base_008.stl
    • 50mm/50mm-Base_009.stl
    • 50mm/50mm-Base_010.stl
    • 50mm/Toppers/50mm-Toppers_001.stl
    • 50mm/Toppers/50mm-Toppers_002.stl
    • 50mm/Toppers/50mm-Toppers_003.stl
    • 50mm/Toppers/50mm-Toppers_005.stl
    • 50mm/Toppers/50mm-Toppers_006.stl
    • 50mm/Toppers/50mm-Toppers_007.stl
    • 50mm/Toppers/50mm-Toppers_008.stl
    • 50mm/Toppers/50mm-Toppers_009.stl
    • 50mm/Toppers/50mm-Toppers_010.stl
    • 50mm/Toppers/50mm-Toppers_011.stl
    • 65mm/65mm-Base_001.stl
    • 65mm/65mm-Base_002.stl
    • 65mm/65mm-Base_003.stl
    • 65mm/65mm-Base_004.stl
    • 65mm/65mm-Base_005.stl
    • 65mm/65mm-Base_006.stl
    • 65mm/65mm-Base_007.stl
    • 65mm/65mm-Base_008.stl
    • 65mm/Toppers/65mm-Topper_001.stl
    • 65mm/Toppers/65mm-Topper_002.stl
    • 65mm/Toppers/65mm-Topper_004.stl
    • 65mm/Toppers/65mm-Topper_005.stl
    • 65mm/Toppers/65mm-Topper_006.stl
    • 65mm/Toppers/65mm-Topper_007.stl
    • 65mm/Toppers/65mm-Topper_008.stl
    • 65mm/Toppers/65mm-Topper_009.stl
    • 80mm/80mm-Base_001.stl
    • 80mm/80mm-Base_002.stl
    • 80mm/80mm-Base_003.stl
    • 80mm/80mm-Base_004.stl
    • 80mm/80mm-Base_005.stl
    • 80mm/80mm-Base_006.stl
    • 80mm/80mm-Base_007.stl
    • 80mm/80mm-Base_008.stl
    • 80mm/80mm-Base_009.stl
    • 80mm/80mm-Base_010.stl
    • 80mm/80mm-Base_011.stl
    • 80mm/toppers/80mm-Topper_001.stl
    • 80mm/toppers/80mm-Topper_002.stl
    • 80mm/toppers/80mm-Topper_003.stl
    • 80mm/toppers/80mm-Topper_004.stl
    • 80mm/toppers/80mm-Topper_005.stl
    • 80mm/toppers/80mm-Topper_006.stl
    • 80mm/toppers/80mm-Topper_007.stl
    • 80mm/toppers/80mm-Topper_008.stl
    • 80mm/toppers/80mm-Topper_009.stl
    • 80mm/toppers/80mm-Topper_010.stl
    • 80mm/toppers/80mm-Topper_011.stl
  • Cults_file_example_1.stl
  • Cults_file_example_2.stl
  • Cults_file_example_3.stl
  • Doors.zip
    • Easy FDM Doors/Finished walls-Hinge_Right.stl
    • Easy FDM Doors/Finished walls-split_doors.stl
    • Easy FDM Doors/Finished walls-split_doors_001.stl
    • Easy FDM Doors/Finished walls-split_doors_002.stl
    • Easy FDM Doors/Finished walls-split_doors_003.stl
    • Easy FDM Doors/Finished walls-split_doors_004.stl
    • Easy FDM Doors/Finished walls-split_doors_005.stl
    • Easy FDM Doors/Finished walls-split_doors_006.stl
    • Easy FDM Doors/Finished walls-split_doors_007.stl
    • Easy FDM Doors/Finished walls-split_doors_008.stl
    • Easy FDM Doors/Finished walls-split_doors_009.stl
    • Easy FDM Doors/Finished walls-split_doors_017.stl
    • Resin Doors/Door_1.stl
    • Resin Doors/Door_2.stl
    • Resin Doors/Door_3.stl
    • Resin Doors/Door_4.stl
    • Resin Doors/Door_5.stl
    • Resin Doors/Hinge_Left.stl
    • Resin Doors/Hinge_Right.stl
    • Resin Doors/Supported for Resin/Door_1.stl
    • Resin Doors/Supported for Resin/Door_2.stl
    • Resin Doors/Supported for Resin/Door_3.stl
    • Resin Doors/Supported for Resin/Door_4.stl
    • Resin Doors/Supported for Resin/Door_5.stl
    • Resin Doors/Supported for Resin/Doors supported for resin.lys
    • Resin Doors/Supported for Resin/Hinge_Left.stl
    • Resin Doors/Supported for Resin/Hinge_Right.stl
  • Floor Flat version_save resin.zip
    • Floor Flat-corner_001.stl
    • Floor Flat-corner_002.stl
    • Floor Flat-corner_003.stl
    • Floor Flat-corner_004.stl
    • Floor Flat-corner_005.stl
    • Floor Flat-corner_006.stl
    • Floor Flat-corner_007.stl
    • Floor Flat-corner_008.stl
    • Floor Flat-Middle_001.stl
    • Floor Flat-Middle_002.stl
    • Floor Flat-Middle_003.stl
    • Floor Flat-Middle_006.stl
    • Floor Flat-Middle_007.stl
    • Floor Flat-Middle_008.stl
    • Floor Flat-Middle_009.stl
    • Floor Flat-Middle_010.stl
    • Floor Flat-Middle_011.stl
    • Floor Flat-Middle_012.stl
    • Floor Flat-Middle_013.stl
    • Floor Flat-Middle_014.stl
    • Floor Flat-Middle_015.stl
    • Floor Flat-Middle_016.stl
    • Floor Flat-Side_001.stl
    • Floor Flat-Side_002.stl
    • Floor Flat-Side_003.stl
    • Floor Flat-Side_004.stl
    • Floor Flat-Side_005.stl
    • Floor Flat-Side_006.stl
  • Floor Hollow_magnet 7mm holes.zip
    • Dark Derelect ship floor-square_connector.stl
    • Floor-corner_001.stl
    • Floor-corner_002.stl
    • Floor-corner_003.stl
    • Floor-corner_004.stl
    • Floor-corner_005.stl
    • Floor-corner_006.stl
    • Floor-corner_007.stl
    • Floor-corner_008.stl
    • Floor-Middle_001.stl
    • Floor-Middle_002.stl
    • Floor-Middle_003.stl
    • Floor-Middle_004.stl
    • Floor-Middle_005.stl
    • Floor-Middle_006.stl
    • Floor-Middle_007.stl
    • Floor-Middle_008.stl
    • Floor-Middle_009.stl
    • Floor-Middle_010.stl
    • Floor-Middle_011.stl
    • Floor-Middle_012.stl
    • Floor-Middle_013.stl
    • Floor-Middle_014.stl
    • Floor-Side_001.stl
    • Floor-Side_002.stl
    • Floor-Side_003.stl
    • Floor-Side_004.stl
    • Floor-Side_005.stl
    • Floor-Side_006.stl
  • Floor basic_great for FDM 7mm magnet holes.zip
    • Corner_1.stl
    • Corner_2.stl
    • Corner_3.stl
    • Corner_4.stl
    • Corner_5.stl
    • Corner_6.stl
    • Corner_7.stl
    • Corner_8.stl
    • Dark Derelect ship floor-square_connector.stl
    • Middle_1.stl
    • Middle_10.stl
    • Middle_11.stl
    • Middle_12.stl
    • Middle_13.stl
    • Middle_14.stl
    • Middle_2.stl
    • Middle_3.stl
    • Middle_4.stl
    • Middle_5.stl
    • Middle_6.stl
    • Middle_7.stl
    • Middle_8.stl
    • Middle_9.stl
    • Side_1.stl
    • Side_2.stl
    • Side_3.stl
    • Side_4.stl
    • Side_5.stl
    • Side_6.stl
  • Joining pillars.zip
    • Dead end Pillars/Hollow/Pillars-end.stl
    • Dead end Pillars/Hollow/Pillars-end_001.stl
    • Dead end Pillars/Hollow/Pillars-end_002.stl
    • Dead end Pillars/Hollow/Pillars-end_003.stl
    • Dead end Pillars/Hollow/Supported for Resin/Pillars-end.lys
    • Dead end Pillars/Hollow/Supported for Resin/Pillars-end.stl
    • Dead end Pillars/Hollow/Supported for Resin/Pillars-end_001.stl
    • Dead end Pillars/Hollow/Supported for Resin/Pillars-end_002.stl
    • Dead end Pillars/Hollow/Supported for Resin/Pillars-end_003.stl
    • Dead end Pillars/Pillars-end.stl
    • Dead end Pillars/Pillars-end_001.stl
    • Dead end Pillars/Pillars-end_002.stl
    • Dead end Pillars/Pillars-end_003.stl
    • Hollowed joining pillars/Pillars 2-Hollow_A1.stl
    • Hollowed joining pillars/Pillars 2-Hollow_A2.stl
    • Hollowed joining pillars/Pillars 2-Hollow_A3.stl
    • Hollowed joining pillars/Pillars 3-Hollow_A1.stl
    • Hollowed joining pillars/Pillars 3-Hollow_A2.stl
    • Hollowed joining pillars/Pillars 3-Hollow_A3.stl
    • Hollowed joining pillars/Pillars 4-Hollow_A1.stl
    • Hollowed joining pillars/Pillars 4-Hollow_A2.stl
    • Hollowed joining pillars/Pillars 4-Hollow_A3.stl
    • Hollowed joining pillars/Pillars 90-Hollow_A1.stl
    • Hollowed joining pillars/Pillars 90-Hollow_A2.stl
    • Hollowed joining pillars/Pillars 90-Hollow_A3.stl
    • Hollowed joining pillars/Supported for resin/Pillars 2-Hollow_A1.stl
    • Hollowed joining pillars/Supported for resin/Pillars 2-Hollow_A2.stl
    • Hollowed joining pillars/Supported for resin/Pillars 2-Hollow_A3.stl
    • Hollowed joining pillars/Supported for resin/Pillars 3-Hollow_A1.stl
    • Hollowed joining pillars/Supported for resin/Pillars 3-Hollow_A2.stl
    • Hollowed joining pillars/Supported for resin/Pillars 3-Hollow_A3.stl
    • Hollowed joining pillars/Supported for resin/Pillars 4-Hollow_A1.stl
    • Hollowed joining pillars/Supported for resin/Pillars 4-Hollow_A2.stl
    • Hollowed joining pillars/Supported for resin/Pillars 4-Hollow_A3.stl
    • Hollowed joining pillars/Supported for resin/Pillars 90-Hollow_A1.stl
    • Hollowed joining pillars/Supported for resin/Pillars 90-Hollow_A2.stl
    • Hollowed joining pillars/Supported for resin/Pillars 90-Hollow_A3.stl
    • Hollowed joining pillars/Supported for resin/Presupp_Pillars-Hollow.lys
    • Hollowed joining pillars/Supported for resin/TPillars 2-Hollow_B1.stl
    • Hollowed joining pillars/Supported for resin/TPillars 2-Hollow_B2.stl
    • Hollowed joining pillars/Supported for resin/TPillars 2-Hollow_B3.stl
    • Hollowed joining pillars/Supported for resin/TPillars 3-Hollow_B1.stl
    • Hollowed joining pillars/Supported for resin/TPillars 3-Hollow_B2.stl
    • Hollowed joining pillars/Supported for resin/TPillars 3-Hollow_B3.stl
    • Hollowed joining pillars/Supported for resin/TPillars 4-Hollow_B1.stl
    • Hollowed joining pillars/Supported for resin/TPillars 4-Hollow_B2.stl
    • Hollowed joining pillars/Supported for resin/TPillars 4-Hollow_B3.stl
    • Hollowed joining pillars/TPillars 2-Hollow_B1.stl
    • Hollowed joining pillars/TPillars 2-Hollow_B2.stl
    • Hollowed joining pillars/TPillars 2-Hollow_B3.stl
    • Hollowed joining pillars/TPillars 3-Hollow_B1.stl
    • Hollowed joining pillars/TPillars 3-Hollow_B2.stl
    • Hollowed joining pillars/TPillars 3-Hollow_B3.stl
    • Hollowed joining pillars/TPillars 4-Hollow_B1.stl
    • Hollowed joining pillars/TPillars 4-Hollow_B2.stl
    • Hollowed joining pillars/TPillars 4-Hollow_B3.stl
    • Pillar Caps/joining pillars ITD-caps_001.stl
    • Pillar Caps/joining pillars ITD-caps_002.stl
    • Pillar Caps/joining pillars ITD-caps_003.stl
    • Pillar Caps/joining pillars ITD-caps_004.stl
    • Pillar Caps/Supported for resin/Caps.lys
    • Pillar Caps/Supported for resin/joining pillars ITD-caps_001.stl
    • Pillar Caps/Supported for resin/joining pillars ITD-caps_002.stl
    • Pillar Caps/Supported for resin/joining pillars ITD-caps_003.stl
    • Pillar Caps/Supported for resin/joining pillars ITD-caps_004.stl
    • Solid joining pillars/Pillars-_001.stl
    • Solid joining pillars/Pillars-_002.stl
    • Solid joining pillars/Pillars-_003.stl
    • Solid joining pillars/Pillars-_004.stl
    • Solid joining pillars/Pillars-_005.stl
    • Solid joining pillars/Pillars-_006.stl
    • Solid joining pillars/Pillars-_007.stl
    • Solid joining pillars/Pillars-_008.stl
    • Solid joining pillars/Pillars-_009.stl
    • Solid joining pillars/Pillars-_010.stl
    • Solid joining pillars/Pillars-_011.stl
    • Solid joining pillars/Pillars-_012.stl
    • Solid joining pillars/Pillars-_013.stl
    • Solid joining pillars/Pillars-_014.stl
    • Solid joining pillars/Pillars-_015.stl
    • Solid joining pillars/Pillars-_016.stl
    • Solid joining pillars/Pillars-_017.stl
    • Solid joining pillars/Pillars-_018.stl
    • Solid joining pillars/Pillars-_019.stl
    • Solid joining pillars/Pillars-_020.stl
    • Solid joining pillars/Pillars-_021.stl
  • Magnet alternatives Pillar dead ends.zip
    • Pillar_end_hollow_001.stl
    • Pillar_end_hollow_002.stl
    • Pillar_end_hollow_003.stl
    • Pillar_end_hollow_004.stl
    • Pillars-end_001.stl
    • Pillars-end_002.stl
    • Pillars-end_003.stl
    • Pillars-end_004.stl
    • Supported/dead end pillar.lys
    • Supported/Pillar_end_hollow_001.stl
    • Supported/Pillar_end_hollow_002.stl
    • Supported/Pillar_end_hollow_003.stl
    • Supported/Pillar_end_hollow_004.stl
  • Magnet hole alternates.zip
    • Apparatuses/Apparatuses Set_1/Broken_pipe.stl
    • Apparatuses/Apparatuses Set_1/C1.stl
    • Apparatuses/Apparatuses Set_1/C1_Hollow.stl
    • Apparatuses/Apparatuses Set_1/C2.stl
    • Apparatuses/Apparatuses Set_1/C3.stl
    • Apparatuses/Apparatuses Set_1/C4.stl
    • Apparatuses/Apparatuses Set_1/C5.stl
    • Apparatuses/Apparatuses Set_1/Overhead_pipe.stl
    • Apparatuses/Apparatuses Set_1/Supported/Broken_pipe.stl
    • Apparatuses/Apparatuses Set_1/Supported/C1 hollow.stl
    • Apparatuses/Apparatuses Set_1/Supported/C2.stl
    • Apparatuses/Apparatuses Set_1/Supported/C3.stl
    • Apparatuses/Apparatuses Set_1/Supported/C4.stl
    • Apparatuses/Apparatuses Set_1/Supported/C5.stl
    • Apparatuses/Apparatuses Set_1/Supported/Overhead_pipe.stl
    • Apparatuses/Apparatuses Set_1/Supported/Set_1.lys
    • Apparatuses/Apparatuses Set_1/Supported/Valve for C3 and C5_Print 2.stl
    • Apparatuses/Apparatuses Set_1/Valve for C3 and C5.stl
    • Apparatuses/Apparatuses Set_2/Bomb hollow.stl
    • Apparatuses/Apparatuses Set_2/Bomb.stl
    • Apparatuses/Apparatuses Set_2/gun pile_1.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Body_does_need_basic_supports.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_left_1.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_left_2.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_right_1.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Gun_right_2.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Hitch_print_4.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Leg_left.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Leg_right.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Scope_1.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Scope_2.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Wheel_left.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Easy cut for FDM/Gun Robot_4-Wheel_right.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Gun Robot_4-Body.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Gun Robot_4-Gun_Left.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Gun Robot_4-Gun_right.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Gun Robot_4-Scope.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Supported for resin/Body.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Supported for resin/Gun_Left.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Supported for resin/Gun_Right.stl
    • Apparatuses/Apparatuses Set_2/Gun Robot/Supported for resin/Scope.stl
    • Apparatuses/Apparatuses Set_2/Gun_wall.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Easy cut FDM/Robot_1_EasyFDM.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_magnet_1.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_magnet_2.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_pin_1.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Easy cut FDM/Robot_1-FDM_Saw_with_pin_2.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Robot_1.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Robot_1-Resin_saw_magnet.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Robot_1-Resin_saw_with_pin.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Robot_1-saw_base.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Robot_1-saw_pin.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Supported for resin/Body.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Supported for resin/Saw base.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Supported for resin/Saw pin.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Supported for resin/Saw with magnet hole.stl
    • Apparatuses/Apparatuses Set_2/Saw Robot/Supported for resin/Saw with pin.stl
    • Apparatuses/Apparatuses Set_2/skull_aparatus.stl
    • Apparatuses/Apparatuses Set_2/spotlight.stl
    • Apparatuses/Apparatuses Set_2/spotlight_FDM.stl
    • Apparatuses/Apparatuses Set_2/supported For Resin/Bomb.stl
    • Apparatuses/Apparatuses Set_2/supported For Resin/gun pile_1.stl
    • Apparatuses/Apparatuses Set_2/supported For Resin/Gun_wall.stl
    • Apparatuses/Apparatuses Set_2/supported For Resin/skull_aparatus.stl
    • Apparatuses/Apparatuses Set_2/supported For Resin/spotlight.stl
    • Apparatuses/Apparatuses Set_3 Blast walls/Blast_Wall_M_1_001.stl
    • Apparatuses/Apparatuses Set_3 Blast walls/blast_wall_M_2_001.stl
    • Apparatuses/Apparatuses Set_3 Blast walls/Supported for resin/Blast_Wall_M_1_001.stl
    • Apparatuses/Apparatuses Set_3 Blast walls/Supported for resin/blast_wall_M_2_001.stl
    • Apparatuses/Magnet apparatuses.lys
    • Classic Walls/A1_1.stl
    • Classic Walls/A1_2.stl
    • Classic Walls/A2_1.stl
    • Classic Walls/A2_2.stl
    • Classic Walls/A3_1.stl
    • Classic Walls/A3_2.stl
    • Classic Walls/A4_1.stl
    • Classic Walls/A4_2.stl
    • Classic Walls/B1.stl
    • Classic Walls/B2.stl
    • Classic Walls/B3_1.stl
    • Classic Walls/B3_2.stl
    • Classic Walls/Supported for resin/A1_1.stl
    • Classic Walls/Supported for resin/A1_2.stl
    • Classic Walls/Supported for resin/A2_1.stl
    • Classic Walls/Supported for resin/A2_2.stl
    • Classic Walls/Supported for resin/A3_1.stl
    • Classic Walls/Supported for resin/A3_2.stl
    • Classic Walls/Supported for resin/A4_1.stl
    • Classic Walls/Supported for resin/A4_2.stl
    • Classic Walls/Supported for resin/B1.stl
    • Classic Walls/Supported for resin/B2.stl
    • Classic Walls/Supported for resin/B3_1.stl
    • Classic Walls/Supported for resin/B3_2.stl
    • Classic Walls/Supported for resin/walls supported.lys
    • Classic Walls/Supported for resin/walls supported_autosave/walls supported_2023-04-21_11-19-37.lyt
    • Classic Walls/Supported for resin/walls supported_autosave/walls supported_2023-04-21_11-37-45.lyt
    • Classic Walls/Supported for resin/walls supported_autosave/walls supported_2023-04-21_11-45-50.lyt
    • Classic Walls/Supported for resin/walls supported_autosave/walls supported_2023-04-21_11-49-02.lyt
    • Magnet guide read me.txt
    • Pillars/FDM pillars/magnet_pillar_FDM_001.stl
    • Pillars/FDM pillars/magnet_pillar_FDM_002.stl
    • Pillars/FDM pillars/magnet_pillar_FDM_003.stl
    • Pillars/FDM pillars/magnet_pillar_FDM_004.stl
    • Pillars/FDM pillars/magnet_pillar_FDM_005.stl
    • Pillars/FDM pillars/magnet_pillar_FDM_006.stl
    • Pillars/FDM pillars/pin_pillar_FDM_001.stl
    • Pillars/FDM pillars/pin_pillar_FDM_002.stl
    • Pillars/FDM pillars/pin_pillar_FDM_003.stl
    • Pillars/FDM pillars/pin_pillar_FDM_005.stl
    • Pillars/FDM pillars/pin_pillar_FDM_006.stl
    • Pillars/FDM pillars/pin_pillar_FDM_007.stl
    • Pillars/Hollowed pillars/magnet_pillar_hollow_001.stl
    • Pillars/Hollowed pillars/magnet_pillar_hollow_002.stl
    • Pillars/Hollowed pillars/magnet_pillar_hollow_003.stl
    • Pillars/Hollowed pillars/magnet_pillar_hollow_004.stl
    • Pillars/Hollowed pillars/magnet_pillar_hollow_005.stl
    • Pillars/Hollowed pillars/magnet_pillar_hollow_006.stl
    • Pillars/Hollowed pillars/pin_pillar_hollow_001.stl
    • Pillars/Hollowed pillars/pin_pillar_hollow_002.stl
    • Pillars/Hollowed pillars/pin_pillar_hollow_003.stl
    • Pillars/Hollowed pillars/pin_pillar_hollow_005.stl
    • Pillars/Hollowed pillars/pin_pillar_hollow_006.stl
    • Pillars/Hollowed pillars/pin_pillar_hollow_007.stl
    • Pillars/Hollowed pillars/Supported/magnet_pillar_hollow.lys
    • Pillars/Hollowed pillars/Supported/magnet_pillar_hollow_001.stl
    • Pillars/Hollowed pillars/Supported/magnet_pillar_hollow_002.stl
    • Pillars/Hollowed pillars/Supported/magnet_pillar_hollow_003.stl
    • Pillars/Hollowed pillars/Supported/magnet_pillar_hollow_004.stl
    • Pillars/Hollowed pillars/Supported/magnet_pillar_hollow_005.stl
    • Pillars/Hollowed pillars/Supported/magnet_pillar_hollow_006.stl
    • Pillars/Hollowed pillars/Supported/pin_pillar_hollow.lys
    • Pillars/Hollowed pillars/Supported/pin_pillar_hollow_001.stl
    • Pillars/Hollowed pillars/Supported/pin_pillar_hollow_002.stl
    • Pillars/Hollowed pillars/Supported/pin_pillar_hollow_003.stl
    • Pillars/Hollowed pillars/Supported/pin_pillar_hollow_005.stl
    • Pillars/Hollowed pillars/Supported/pin_pillar_hollow_006.stl
    • Pillars/Hollowed pillars/Supported/pin_pillar_hollow_007.stl
  • Plague walls.zip
    • A1_1.stl
    • B1.stl
    • Supported for resin/A1_1.stl
    • Supported for resin/B1.stl
    • Supported for resin/plague walls.lys
  • Torment walls.zip
    • Doors/split for FDM/Door_1_split.stl
    • Doors/split for FDM/Door_1_split_2.stl
    • Doors/split for FDM/Door_2_split.stl
    • Doors/split for FDM/Door_2_split_2.stl
    • Doors/Supported/doors.lys
    • Doors/Supported/doors_autosave/doors_2023-11-07_15-21-23.lyt
    • Doors/Supported/Tormented door hinge_1stl.stl
    • Doors/Supported/Tormented door hinge_2.stl
    • Doors/Supported/Tormented door_1.stl
    • Doors/Supported/Tormented door_2.stl
    • Doors/Supported/Tormented door_3.stl
    • Doors/Supported/Tormented door_4.stl
    • Doors/Supported/Tormented door_5.stl
    • Doors/Tormented door hinge_1stl.stl
    • Doors/Tormented door hinge_2.stl
    • Doors/Tormented door_1.stl
    • Doors/Tormented door_2.stl
    • Doors/Tormented door_3.stl
    • Doors/Tormented door_4.stl
    • Doors/Tormented door_5.stl
    • Pillars/1_Pillars-Magnet.001.stl
    • Pillars/1_Pillars-Magnet.002.stl
    • Pillars/1_Pillars-Magnet.005.stl
    • Pillars/1_Pillars-Magnet.007.stl
    • Pillars/1_Pillars-Magnet.008.stl
    • Pillars/1_Pillars-Pin.001.stl
    • Pillars/1_Pillars-Pin.002.stl
    • Pillars/1_Pillars-Pin.003.stl
    • Pillars/1_Pillars-Pin.006.stl
    • Pillars/1_Pillars-Pin.008.stl
    • Pillars/1_Pillars-Tormented.001.stl
    • Pillars/1_Pillars-Tormented.005.stl
    • Pillars/1_Pillars-Tormented.006.stl
    • Pillars/1_Pillars-Tormented.007.stl
    • Pillars/1_Pillars-Tormented.008.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Magnet.001.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Magnet.002.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Magnet.005.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Magnet.007.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Magnet.008.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Pin.001.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Pin.002.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Pin.003.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Pin.006.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Pin.008.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Tormented.001.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Tormented.005.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Tormented.006.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Tormented.007.stl
    • Pillars/Hollowed/Hollowed-1_Pillars-Tormented.008.stl
    • Pillars/Hollowed/Hollowed-Tormented wall clips and magnets_1-Corner pillar.001.stl
    • Pillars/Hollowed/Hollowed-Tormented wall clips and magnets_1-Corner pillar_mag.001.stl
    • Pillars/Hollowed/Hollowed-Tormented wall clips and magnets_1-Corner pillar_pin.001.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars all.lys
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Magnet.001.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Magnet.002.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Magnet.005.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Magnet.007.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Magnet.008.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Pin.001.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Pin.002.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Pin.003.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Pin.006.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Pin.008.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Tormented.001.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Tormented.005.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Tormented.006.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Tormented.007.stl
    • Pillars/Hollowed/Supported/Hollowed-1_Pillars-Tormented.008.stl
    • Pillars/Hollowed/Supported/Hollowed-Tormented wall clips and magnets_1-Corner pillar.001.stl
    • Pillars/Hollowed/Supported/Hollowed-Tormented wall clips and magnets_1-Corner pillar_mag.001.stl
    • Pillars/Hollowed/Supported/Hollowed-Tormented wall clips and magnets_1-Corner pillar_pin.001.stl
    • Pillars/Pillar caps/Supported/Caps.lys
    • Pillars/Pillar caps/Supported/Caps_autosave/Caps_2023-11-07_16-15-22.lyt
    • Pillars/Pillar caps/Supported/Tormented caps. -cap.001.stl
    • Pillars/Pillar caps/Supported/Tormented caps. -cap.009.stl
    • Pillars/Pillar caps/Supported/Tormented caps. -cap.013.stl
    • Pillars/Pillar caps/Supported/Tormented caps. -cap.016.stl
    • Pillars/Pillar caps/Supported/Tormented caps. -cap.020.stl
    • Pillars/Pillar caps/Supported/Tormented caps. -cap.021.stl
    • Pillars/Pillar caps/Supported/Tormented caps. -cap.022.stl
    • Pillars/Pillar caps/Tormented caps. -cap.001.stl
    • Pillars/Pillar caps/Tormented caps. -cap.009.stl
    • Pillars/Pillar caps/Tormented caps. -cap.013.stl
    • Pillars/Pillar caps/Tormented caps. -cap.016.stl
    • Pillars/Pillar caps/Tormented caps. -cap.020.stl
    • Pillars/Pillar caps/Tormented caps. -cap.021.stl
    • Pillars/Pillar caps/Tormented caps. -cap.022.stl
    • Pillars/Tormented wall clips and magnets_1-Corner pillar.001.stl
    • Pillars/Tormented wall clips and magnets_1-Corner pillar_mag.001.stl
    • Pillars/Tormented wall clips and magnets_1-Corner pillar_pin.001.stl
    • Walls/Non-supported/Mag/Tormented wall_1_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_10_Door_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_11_Door_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_12_Door_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_2_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_3_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_4_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_5_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_6_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_7_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_8_Door_mag.stl
    • Walls/Non-supported/Mag/Tormented wall_9_Door_mag.stl
    • Walls/Non-supported/Tormented wall_1_Clip.stl
    • Walls/Non-supported/Tormented wall_10_Door_Clip.stl
    • Walls/Non-supported/Tormented wall_11_Door_Clip.stl
    • Walls/Non-supported/Tormented wall_12_Door_Clip.stl
    • Walls/Non-supported/Tormented wall_2_Clip.stl
    • Walls/Non-supported/Tormented wall_3_Clip.stl
    • Walls/Non-supported/Tormented wall_4_Clip.stl
    • Walls/Non-supported/Tormented wall_5_Clip.stl
    • Walls/Non-supported/Tormented wall_6_Clip.stl
    • Walls/Non-supported/Tormented wall_7_Clip.stl
    • Walls/Non-supported/Tormented wall_8_Door_Clip.stl
    • Walls/Non-supported/Tormented wall_9_Door_Clip.stl
    • Walls/Supported for resin/Tormented wall_1_Clip.stl
    • Walls/Supported for resin/Tormented wall_1_Mag.stl
    • Walls/Supported for resin/Tormented wall_2_Clip.stl
    • Walls/Supported for resin/Tormented wall_2_mag.stl
    • Walls/Supported for resin/tormented walls with clips.lys
    • Walls/Supported for resin/tormented walls with magnet slots.lys
    • Walls/Supported for resin/tormented walls.lys
    • Walls/Supported for resin/tormented walls_3 clip.stl
    • Walls/Supported for resin/tormented walls_3 mag.stl
  • Walls.zip
    • FDM Walls/A1_1.stl
    • FDM Walls/A1_3.stl
    • FDM Walls/A2_1.stl
    • FDM Walls/A2_2.stl
    • FDM Walls/A3_1.stl
    • FDM Walls/A3_2.stl
    • FDM Walls/A4_1 (2).stl
    • FDM Walls/A4_1.stl
    • FDM Walls/A4_2.stl
    • FDM Walls/B1.stl
    • FDM Walls/B2.stl
    • FDM Walls/B3_1.stl
    • FDM Walls/B3_2.stl
    • Print guide.txt
    • Resin Walls/A1_1.stl
    • Resin Walls/A1_2.stl
    • Resin Walls/A2_1.stl
    • Resin Walls/A2_2.stl
    • Resin Walls/A3_1.stl
    • Resin Walls/A3_2.stl
    • Resin Walls/A4_1.stl
    • Resin Walls/A4_1_dmg.stl
    • Resin Walls/A4_2.stl
    • Resin Walls/B1.stl
    • Resin Walls/B2.stl
    • Resin Walls/B3_1.stl
    • Resin Walls/B3_2.stl
    • Resin Walls/Resin fitting_Read me.txt
    • Resin Walls/Supported for Resin/A1_1.stl
    • Resin Walls/Supported for Resin/A1_2.stl
    • Resin Walls/Supported for Resin/A2_1.stl
    • Resin Walls/Supported for Resin/A2_2.stl
    • Resin Walls/Supported for Resin/A3_1.stl
    • Resin Walls/Supported for Resin/A3_2.stl
    • Resin Walls/Supported for Resin/A4_1.stl
    • Resin Walls/Supported for Resin/A4_1_dmg.stl
    • Resin Walls/Supported for Resin/A4_2.stl
    • Resin Walls/Supported for Resin/B1.stl
    • Resin Walls/Supported for Resin/B2.stl
    • Resin Walls/Supported for Resin/B3_1.stl
    • Resin Walls/Supported for Resin/B3_2.stl
    • Resin Walls/Supported for Resin/Walls supported for resin..lys
    • Resin Walls/Supported for Resin/Walls supported for resin._autosave/Walls supported for resin._2023-02-13_17-59-15.lyt
  • Warped floor tiles.zip
    • FDM_cut_out_tile_001.stl
    • FDM_cut_out_tile_002.stl
    • FDM_cut_out_tile_003.stl
    • Flat_cut_out_tile_001.stl
    • Flat_cut_out_tile_002.stl
    • Flat_cut_out_tile_003.stl
    • Supported for resin/Flat_cut_out_tile_001.stl
    • Supported for resin/Flat_cut_out_tile_002.stl
    • Supported for resin/Flat_cut_out_tile_003.stl
    • Supported for resin/Warped tile 1.stl
    • Supported for resin/Warped tile 2.stl
    • Supported for resin/Warped tile 3.stl
    • Supported for resin/Warped tile 4.stl
    • Supported for resin/Warped tile 5.stl
    • Supported for resin/Warped tiles.lys
    • Warped tile 1.stl
    • Warped tile 2.stl
    • Warped tile 3.stl
    • Warped tile 4.stl
    • Warped tile 5.stl

Learn more about the formats
Last update 2023-11-08 at 02:29
Publication date 2022-11-17 at 02:35
Design number 926293
warlock3dmodels

warlock3dmodels

3D printer file info

3D model description

This is my current WIP for you folks! For all of your murder team and ship boarding needs!

-12 Tormented variant walls
-6 Tormented Pillars with 7 Tormented caps
-13 double sided walls and the corresponding doors and hinges
-21 joining pillars- to accommodate all the angles needed
-4 wall end pillars.
-Apparatus sets 1,2,3 and 4!
-Twisted tiles!
-4 different pillar locking caps.
-3 Barricades
-50+ themed bases of sizes 25mm-80mm
ALL optimized to print with FDM with MINIMAL supports.
Supported for Resin now included.

I included Bonus floor panels (28 panels total)
•V1- 7mm magnet slots and a basic square cut out connection method.
•V2- 7mmMagnet slots hollowed for Resin printing
•V3- extra flat to conserve the most resin

Every thing is FULLY compatible with the box sets.

To do list:
-Chaos apparatus

11/07/2023 Note
Added the Tormented walls set.
Thank you for your patience and support!

As always, please send in any or all feedback or requests for this set. If this one goes well, I will be doing similar “alien” themed sets as well.

NOTE
These files are for personal use under a non commercial license in place for all the models I release on my website. -Creative commons Attribution-NonCommercial-NoDerivsCC BY-NC-ND

Print suggestions:
KT:
•Walls without doors x14
•Walls with doors x10 Print doors and hinges corresponding to the doors you choose.
•Wall caps x30
•End pillars x2
•Joining Pillars fourway x24 (print the others only if you want alternate options. Ex:I printed 4x90° angle for when I want corners.)
•Apparatuses:
-For ITD x2 each (valve for C3 and C5 needs to be printed x4.)
-For SV x2 each, except only one of each robot.
•Barricades x2 of each

BA:
Is 2x most of the parts except for the apparatuses and barricades. you wont need either unless you want them.
•Walls without doors x28
•Walls with doors x20 Print doors and hinges corresponding to the doors you choose.
•Wall caps x60
•End Pillars x4
•Joining pillars fourwayx48

Volume estimates for resin (these estimates are per one unit):
•Wall:25ml
•Pillar:20ml
•doors and hinges supported:10ml
•barricades supported: 10-15ml
•caps supported: 3ml
•floor tiles: 35-55ml

If you are printing with FDM (plastic extrusion):
Very few files will need supports at all. The walls and details on the walls were designed with FDM in mind so most have an angle on the underside. But, Doorways and some of the apparatuses might need minimal support.

If you are printing With SLA (Resin):
I added Presupported files for most sections. I've test printed all of them with full success. But I know everyone has the potential of a finicky printer, so if you have issues, contact me on cults or send me an Email, Warlock3dmodels@gmail.com. I will try to help the best I can.

Note: All of the files are designed with FDM in mind, so almost all of the files will also print directly on the print bed(walls and Pillars at very least will easily print directly on the bed), though you may end up with elephants foot on the models. Printing directly on the print bed can be difficult to remove if you don't have a flex bed.

3D printing settings

The wall sections with the doors and few of the apparatus will likely need supports in the doorway but the rest of the set should print without supports on FDM printers. The split doors are for FDM and the whole doors are for resin printing. (pre-supported still to come)

If you are printing with Resin, any bit of over exposure will increase the thickness of the tabs too much so I have also included "Resin fitting" file with smaller tabs to help.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.