Tower of Darkness - Level 5 (Split/Magnetic)

UPDATE 04/28/2018

Add a good number of files

Level 5 Joint Marked = Added simple markers on each of the tower joints numbering them 1 - 4 for their matching level 6 tower
Level 6 Marked = Added simple markers on each of the tower joints numbering them 1 - 4 for their matching level 5 tower
Level 6 Close = Same as previous except, moved the towers in closer to reduce print time and make rafts or skirts more valid if needed
Level 6 Pillar n = Single tower file for printing separately if you wish to reorient them for printing or something; n = pillar number (they are marked)

Original Posting

The top level of the tower (Level 5) was still to large for my printer despite Devonjones awesome work splitting it. I went ahead and split it further. Their are three new level 5 files, two are smooth tops that do not use a level 6 and the third has joints and slots for magnets to attach on level 6.

Level 5 Short - Smooth top (no level 6) and shorter of the two styles
Level 5 Tall - Smooth top (no level 6) and taller of the two styles
Level 5 Joint - Jointed top (level 6 required)
Level 6 - Jointed level 6 to match Level 5 Joint file

My printer is being repaired, so I have not had a chance to test the tolerances, but I will as soon as I'm able. Also, I had to reduce the mesh before working as the ridiculous vertex count was giving my machine a lot of troubles.

-