Dino pack
$80.00 Dino pack
3D
Published 2022-11-21T10:56:41+00:00
This set includes :
all files are supported in Chitubox (base + miniature) as well as the related STLs separately.
- Allosaurus (mounted and not mounted) 3 poses. Base size is Large (2 inches or 50mm)
- Ankylosaurus. Base size is Huge (3 inches or 75mm)
- Brachiosaurus (with and without the platform). Base size is Gig (4 inches or 10cm)
- Brontosaurus (male-female-baby). Base size is Gig (4 inches or 10cm) and for the baby Base size is Large (2 inches or 50mm)
- Carnotaurus. Base size is Large (2 inches or 50mm)
- Dilophosaurus (with and without the frill) Base size is Medium (1 inch or 25mm)
- Dimetrodon. Base size is Large (2 inches or 50mm)
- Giganotosaurus. Base size is Huge (3 inches or 75mm)
- Kelenken (mounted and not mounted) 3 poses. Base size is Large (2 inches or 50mm)
- Mosasaurus. Base size is Gig (4 inches or 10cm)
- Pachycephalosaurus. Base size is Medium (1 inch or 25mm)
- Parasaurolophus. Base size is Huge (3 inches or 75mm)
- Plesiosaur. Base size is Large (2 inches or 50mm)
- Pterodactylus (mounted and not mounted) 3 poses. Base size is Large (2 inches or 50mm)
- Purussaurus. Base size is Gig+ (23cm / 9cm) and head: Base size is Large+ (7cm / 5,5cm)
- Quetzal, flying and standing. and flying boat. Base size of the flying boat is Gargantuan (4 inches, or 10 cm). Base size of the flying Quetzalcoatlus is Huge (3 inches, or 75 mm).
- Spinosaurus. Base size is Huge (3 inches or 75mm)
- Stegosaurus. Base size is Huge (3 inches or 75mm)
- T-Rex. Base size is Huge (3 inches or 75mm)
- T-Rex-feathers. Base size is Huge (3 inches or 75mm)
- T-Rex-zombie. Base size is Huge (3 inches or 75mm)
- Therizinosaurus. Base size is Huge (3 inches or 75mm)
- Triceratops. Base size is Huge (3 inches or 75mm)
- Utharaptor 3 poses. Base size is medium (1 inch or 25mm)
I advise to slice layers between 0.02 (best details) and 0.05 (fast print) print time, depending on your preferences.
For crisp details and avoid any thin support failure, I advise to set the exposure times long enough (depends on the printer).
To remove the delicate supports, use a pliers !
| Date published | 21/11/2022 |
| Price | $80.00 |