Navy Maxim Gun

Intended for 3d print.

Late 19th -early 20th century style navy machine gun. Loosely based on historical Maxim navy guns.
This model pack includes four variants of gun. See detailed list below.
The models are primarily intended for tabletop miniatures games. They are most suitable for 28mm scale and upwards, and all models are prescaled to roughly 28mm scale. Please do note that, depending on the quality of your printer, you may have to increase the scale of the models slightly to avoid them being too delicate for practical use. Printing at sub-28mm scale is not recommended.
All variants prints as one-piece models, so no assembly is required.

Detailed list

1 Maxim gun with shield and ammo belt
1 Maxim gun with ammo belt
1 Maxim gun
1 Maxim gun aimed downward

Intended for print in 28mm scale or upwards. Depending on the quality of your printer, the traverse assemblage may be slightly too delicate at 28mm scale, so you may have to increase the scale of the model slightly.

Models are all prescaled to approximately 28mm scale.
Relatively high printer settings are recommended (0,08 mm layer height, 20 percent infill).
Printing time depends entirely on hardware, selected size, selected model(s) selected settings et cetera. A rough estimate is 60 minutes printing time for a single model at default scale.