Skip to content

Mini-z buggy mb-010 Brushless and electronics conversion

IMG_20200819_114339_1.jpg Mini-z buggy mb-010 Brushless and electronics conversion
IMG_20200819_114230_1.jpg Mini-z buggy mb-010 Brushless and electronics conversion
IMG_20200819_114240.jpg Mini-z buggy mb-010 Brushless and electronics conversion
IMG_20200819_114316_1.jpg Mini-z buggy mb-010 Brushless and electronics conversion
IMG_20200819_114708_1.jpg Mini-z buggy mb-010 Brushless and electronics conversion
IMG_20200820_195839[1.jpg Mini-z buggy mb-010 Brushless and electronics conversion
IMG_20200820_195234[1.jpg Mini-z buggy mb-010 Brushless and electronics conversion
Soporte_ESC_buggy.stl Mini-z buggy mb-010 Brushless and electronics conversion
Tapas_MB-010_para_electronica_custom.stl Mini-z buggy mb-010 Brushless and electronics conversion
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.7k views
  • 1 like
  • 7 downloads
License
3D design format
Folder details Close
  • Soporte_ESC_buggy.stl
  • Tapas_MB-010_para_electronica_custom.stl

Learn more about the formats
Publication date 2022-11-27 at 20:43
?
Published to Thingiverse on: 2020-08-19 at 18:34
Design number 939123
Synco

Synco

3D printer file info

3D model description

*23/08/20. error found and solved in the electronic covers.

Electronic covers and esc support to adapt brushless motors and nano receivers from dasmikro.
Original brushless conversion is too expensive and you're always tied to kyosho radio protocols. With this conversion diferent protocols are possible, mine has SANWA protocol tested with a MT-4 radio working perfect.

The back of the covers are no longer fixed with clip, each cover is fixed with the original screws and 2 2x9mm screws for the back. The short screws that fix the motor support are recicled in the ESC support.

Electronic components:

Brushless motor: I use kyosho motor but i plan to convert 1410 motors.
XC-10a Brushless esc.
dasmikro servo board for mini-z.
dasmikro 4ch nano receiver for sanwa (servo cables provided with receiver on purchase).
2 Walkera female connector cables for battery, i solder them in series to achieve 7v (2s).
Lipo batteries: turnigy 300mah for losi.

For assembly you need to trim a bit of plastic in the chassis for the receiver and drill 2 holes for the battery cables.

This is still in progress, i am open to any suggestions.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.