Skip to content

Grim Tiger II Heavy Battle Tank

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 15.6k views
  • 122 likes
  • 109 downloads
  • 6 collections
  • 7 comments
  • 1 make
License
3D design format
STL Folder details Close
  • Cable X2.stl
  • Exhaust - COMBINED for RESIN X2.stl
  • Exhaust Mount X2.stl
  • Exhaust X4.stl
  • Fender _No_Skirt - Left - Mirror for Right - FDM or RESIN.stl
  • Fender _Skirt - Left - Mirror for Right - FDM or RESIN.stl
  • Fender _With_Skirt - Left - Mirror for Right - RESIN ONLY.stl
  • Heat Gun.stl
  • Heavy MG.stl
  • Hull - Compartment Door.stl
  • Hull - FDM.stl
  • Hull - RESIN.stl
  • Pintle - Ammo Box X2.stl
  • Pintle - MG.stl
  • Pintle - Mount.stl
  • Pintle - Stormgun.stl
  • PlasmaCannon_MAIN.stl
  • RESIN Supported - Siege Cannon MAIN.stl
  • RESIN Supported - Spinner Cannon MAIN.stl
  • SUPPORTED - Cable X2.stl
  • SUPPORTED - Exhaust COMBINED X2.stl
  • SUPPORTED - Fender_With_Skirt - Left - Mirror for Right - Heat fender and bend to install track.stl
  • SUPPORTED - Heat Gun.stl
  • SUPPORTED - Heavy MG.stl
  • SUPPORTED - Hull for Resin.stl
  • SUPPORTED - Pintle - Ammo Box.stl
  • SUPPORTED - Pintle - MG.stl
  • SUPPORTED - Pintle - Mount.stl
  • SUPPORTED - Pintle - Stormgun.stl
  • SUPPORTED - PlasmaCannon_MAIN.stl
  • SUPPORTED - Spare Track on rack.stl
  • SUPPORTED - Spare Wheel on rack.stl
  • SUPPORTED - Sponson - Left - Mirror for Right.stl
  • SUPPORTED - Sponson - Weapon Cap X2.stl
  • SUPPORTED - Sponson - Weapon Mount X2.stl
  • SUPPORTED - Suppressor_Cannon_MAIN.stl
  • SUPPORTED - Track - Left - Mirror for Right.stl
  • SUPPORTED - Turret - Hatch.stl
  • SUPPORTED - Turret - Henschel.stl
  • SUPPORTED - Turret - Optic.stl
  • SUPPORTED - Turret - Platform - Closed.stl
  • SUPPORTED - Turret - Platform - Open.stl
  • SUPPORTED - Turret - Porche.stl
  • SUPPORTED - Turret - Swivel.stl
  • SUPPORTED - TwinAntiTankCannon_MAIN.stl
  • SUPPORTED - TwinBattlecannon_MAIN.stl
  • SUPPORTED - TwinMeltas - HULL.stl
  • SUPPORTED - TwinSpinnerCannon_MAIN.stl
  • SUPPORTED - TwinStubbers - HULL.stl
  • Siege Cannon MAIN.stl
  • Spare Track on rack.stl
  • Spare Wheel on rack.stl
  • Spinner Cannon MAIN.stl
  • Sponson - Left - Mirror for Right.stl
  • Sponson - Weapon Cap X2.stl
  • Sponson - Weapon Mount X2.stl
  • Suppressor_Cannon_MAIN.stl
  • Track - Left - Mirror for Right.stl
  • Turret - Hatch.stl
  • Turret - Henschel.stl
  • Turret - Optic.stl
  • Turret - Platform - Closed.stl
  • Turret - Platform - Open.stl
  • Turret - Porche.stl
  • Turret - Swivel.stl
  • TwinAntiTankCannon_MAIN.stl
  • TwinBattlecannon_MAIN.stl
  • TwinMeltas - HULL.stl
  • TwinSpinnerCannon_MAIN.stl
  • TwinStubbers - HULL.stl

Learn more about the formats
Last update 2022-11-30 at 03:27
Publication date 2022-11-28 at 18:59
Design number 940391
GrimPrints

GrimPrints

3D printer file info

3D model description

The Grim Tiger II Heavy Battle Tank includes rotating turret and weapon options which are prepped for magnetizing including Twin Battle Cannons, Suppressor Cannon with co-axial Autocannon, Twin Anti-tank Cannons, Twin Heavy Spinner Cannons and Super Heavy Plasma Cannon. The sponsons are prepped to be magnetized from the inside so you can choose to use them or not and the magnets are not visible from the outside. There are hull weapons like the mini gatling gun, mini siege cannon, twin heat gun and twin stubber. It is the perfect size to represent a heavy tank for heroic 28mm wargaming, especially the latest heavy tank design by a popular wargaming manufacturer. Turret hatches are loose so you can add your own operators. There's two pintle weapon options, extra track links, spare wheels, cables etc to aDorn your tank.

The fenders are provided as two pieces with the skirt separate OR as one piece for resin printing for a more polished look. Note that if you use the 1-piece fender, you may need to heat the resin piece it in warm water to slightly bend it open to insert the track, then bend it back. It's not difficult but will result in a more polished vehicle. (The 2-piece fenders with the skirt separate are recommended for FDM printing) The tank also includes a compartment inside the hull to store your extra weapons.

This kit also includes your choice of "Porche" or Henschel turret.

Mirror the left side parts to get the right side. Minimal supports are required for FDM printing, it will be beneficial to slice the hull and tracks down the middle to reduce or even eliminate the supports required.

DIMENSIONS:

Front to back including fenders/treads(but not main cannons) is 170mm.

Width including sponsons is 135mm. Not including sponsons is 108mm.

Height including turret is 92mm, not including turret 55mm.

By purchasing this product you agree to abide by the following terms and conditions

These files are for personal use only. You may not Sell, share, or distribute the files, prints, or their derivatives under any circumstance.

You may modify or resize the models or files for personal use only. You may not sell or distribute modified models or any models and files containing portions of Grim Prints models.

3D printing settings

FDM: I print with a Prusa Mk3i. 0.4mm nozzle, 5% infill, 3 layer wall thickness, 4 layers bottom, 5 layers top. 100% speed. I use variable layer height between .2mm and .08mm. There's a feature in Prusaslicer that auto-generates the ideal layer thickness between your highest and lowest settings. IT IS AMAZING.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.