DECORATION OF "JESUS IS THE REASON FOR THE SEASON" BLOCKS IN THE SHAPE OF A TREE

IF YOU LIKE THIS ENOUGH TO DOWNLOAD IT - PLEASE BE KIND ENOUGH TO LEAVE A LIKE.

THIS WOULD LOOK SO NATURAL IN WOOD FILAMENT.

Jesus is the reason for the season!!

These blocks have a cylindrical hole through which the rod will fit and the blocks can rotate.

For the not faint of heart I included a rod to print - I would however suggest you use a dowel stick.

HAPPY PRINTING!

For easier movement scale the rod slightly smaller if you want to rotate the blocks.

At a 100% scale it takes very long to print but do not scale smaller than 60% as there will not be enough space between the letters for a proper print.

I made filament changes 4 layers below the letters so that the writing will be in a different colour and just above the letters changed it back to the original colour.

Remember to add (as little as possible) supports for the hole - too much supports would be a battle to remove. pLAY AROUND WITH YOUR SUPPORT SETTINGS. There is so much one can do for easier removal. Study the settings guide!

This could be printed at 0.25 Layer height. (Be mindful of filament changes when you COUNT the layers and selecting your layer height)

Print speed could be increased to 60mm p/s BUT activate SMALL FEATURES IN EXPERIMENTAL and set length at 30mm at 50% speed.

PLEASE CONTACT ME IF YOU HAVE ANY QUESTIONS - I'LL BE HAPPY TO ASSIST!