PACK 5 DIY LUSTRE MODELS WITHOUT SUPPORT INTERIOR DESIGN DECO v2

Good evening to all,

So here is a complete pack, including 1 plate to accommodate a KIT IKEA or any other for standard bulbs E27 and 5 models of rods to come nesting and glue if you wish. For my part I just nesting, so when my wife wants to change the deco she is untangled with his rods LOL.

then for his chandeliers NO SUPPORT when printing so cheap chandeliers at all.

first print the plate, VERY IMPORTANT because then print a rod of the model you want, why that. you will be able to adjust the height of the rod during the setting CURA, so that your adjustment to the nesting is perfect. the rods are at the base 5 mm thick, compared to your printer settings, it may be necessary to reduce or increase its thickness so that the rods fit easily or more difficult depending on what you want.

To finish, you can mix the rods between them and of course the colors, it is up to you to design your chandelier ...

the dimensions of the chandeliers in the end

dimensions 60 to 61 cm in diameter

of course if you mix the rods the max diameter will be determined by the longest rod model.

a good print to you

I remain at your disposal if needed by message. and it will be with pleasure.

see you soon

standard parameter

minimum filling of the base 20

for the stems 15%.