TOC Game, Toc Game, DOG Game

I offer you here a TOC game, also for smaller printers.

The game plate is only 180mm in diameter and can be colored.

The play plate is screwed with SPAX 2.5x8 or 3x8 mm.

Suitable for max. 4 players. Played with only 4 cones each, similar to the game "Mensch ärgere Dich nicht" Instead of the dice there are cards and more rules.

With a dice, you can also play the Mensch ärgere Dich nicht with it.

There is a separate casket for each of the cards and cones. Also included are card holders.

The game cone box can accommodate five colors of five cones each.

This gives you a spare cone per color, as well as an alternate color at the ready in case a player really wants a special color.

All you have to do is purchase the playing cards. See the photo gallery.

You can find the game rules at BRÄNDI-DOG even multilingual, as well as at www.familienLager.ch

And now comes the hammer. You can store the game with the accessories in an empty box for filament rolls.

Brändi Dog is a registered, protected trademark.

It is used here merely to draw your attention to the rules of play required for it.

Brändi is an organization with with disabled people, based in Switzerland. If you purchase the original from Brändi, I am also happy. You will be supporting disabled people in Switzerland.

Do good, not only at Christmas time.

At "connexxion24-Lifestyle" Find original accessories to Brändi Dog, as well as dice and playing cards and v.m..

Game board, base and inlay, according to the desired colors. Without support. Printing with SKIRT and 1.2mm wall.

The game cones need BRIM to adhere to the print bed. I have chosen a BRIM width of 5 mm

.

Caskets have a wall thickness of 1.6 mm. INFILL 20%.

The card holders have a wall of 1.2 mm and infill 15 to 18%.