Christmas Cool Gnome / Gnomo Cool Navideño

Christmas Cool Gnome / Gnomo Cool Navideño

The result of 3d printing + Christmas = Some cool stuff for 3d print. #XMASCULTS

PRINT IN PLACE MODEL… to make it jump!
See it here: Cool Gnome Jump Video

Its Christmas 2022 and the COOL GNOME is here to make better these days… jumping!
Jump is something he made by himself and that is why this dude is more cool!
Once he is in your hands you have to try make it jump as the videos!
It is not necessary to add springs or any other extra accessories. Model printed 100% with PLA print in place without supports.
The model was designed to be printed in one place without supports. Just the base of the gnome must me assembled with some adhesive after printing.

INSTRUCTIONS:
1. Print both stl models
2. Assembly the base to the end of the gnome using adhesive (pay attention to the position of the arrow)
2. Paint the ayes (optional)
4. Jump!

See the assembly video here: Assembly video

You can scale the model as bigger as you want. We do not recommend scale the model to be smaller.

Also you can try the Jumpin Cool Snowman here:
https://cults3d.com/en/3d-model/home/jumping-cool-snowman
https://cults3d.com/en/3d-model/various/jumping-ghost

Do not forget to share your print results and SUBSCRIBE to my Cults account to get updates.

NOTE IMPORTANT: This stl file is just for personal use. Not for commercial use. No derivatives.

:)

Use your favorite brand of filament. The models on the photos were printed with PLA and we think it’s the best option for this kind of models.

Before printing make sure your bed and 3d printer is calibrated and make sure to have a good first layer in order to avoid issues, we recommend to use the option “Brim” on build plate adhesion from Cura slicer or something related in other software.
Also, we recommend have a good layer cooling in order to prevent curling and warping.

You can use, at least 0.2/0.24mm layer height.
3 perimeters, concentric patterns
12-15% infill.
0.4 nozzle.
NO SUPPORTS REQUIRED.