OH! Santa Baby – Extreme Jack-O – by SPARX

First let me thank all of my followers for supporting my sculpting with the purchases of my models and the comments and feedback . . what better way to reward your support than a free Christmas model . . . . .

So a bit late for me to jump on the Jack-O-Pose concept, so how about an extreme Jack-O pose with a Christmas theme . . .
No real NSFW here just two models 1/6th and 1/10th scale . . plus an added Desk Tidy and Redfox torso bits for the fans of Refox.

The head parts are removable and interchangeable with magnets (see pics) on the 1/6th scale model.
All parts are cut files to fit build plate of small resin printers like the Photon, with the exception of the Roof Desk Tidy needs FDM print . . .unless you cut it in half.

1/6th model is 280x156x90mm and requires no base as it will stand flat on shelf/desk.
1/10th model is 183x104x58mm and requires no base as it will stand flat on shelf/desk or the roof desk tidy.

1/6th Model Parts
1 upper torso
1 lower torso
1 Left Arm
1 Right Foot
1 Left Leg n Foot
2 Heads
1 Head pin

1/10th Model Parts
2 upper torso
2 lower torso
1 Left Leg n Foot
1 Roof Desk Tidy

14 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

3D PRINTING SETTINGS
I have not as yet had time to test print full models but judging by the previous 1/6th and 1/10th files/models I have printed I offer the following advice . .

1/10th Models

Resin Printing;
Hollow 2.40 Raft 95%

1/6th Models
Resin Printing;
Hollow 2.40 Raft 95%
Torso,and Legs

Hollow 2.70 Raft 115%
Head

DO NOT Hollow
Left Arm

FDM
ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.
Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining. ..