Artillery Sidewinder X1 and X2 roll holder - Artillery Sidewinder X1 and X2 roll holder

Double roll holder for Artillery Sidewinder X1 and X2.

I found this https://www.thingiverse.com/thing:3650974, but wanted one for 2 rolls,

I got to work and designed several models.

Files:

• Artillery Double Roll Holder X1, 2 Rolls with separation in the middle.

• Artillery Double Roll Holder X1, 2 Rolls and 1 in between

• Artillery Double Roll Holder X2, 2 Rolls and 1 in between

• Artillery Double Roll Holder X2, 2 Rolls with separation in between

• Those of the X1 are for the V4 version bearing diameter of the original roll holder 14 mm.

• Those for the x2 original roll holder bearing diameter is 11 mm.

• I put an 8mm threaded rod, 4 washers and 4 nuts on each side to the roll holder, as seen in the pictures to prevent it from buckling or narrowing and the rollers coming out.

Double Roll Holder for Sidewinder X1 and X2 Artillery.

I found this https://www.thingiverse.com/thing:3650974, but I wanted one for 2 rolls,

I got down to work and design several models.

Records:

Double Artillery roll holder X1, 2 Rolls with separation in the middle

Double Artillery Roll Holder X1, 2 Rolls and 1 in the middle

Double Artillery Roll Holder X2, 2 Rolls and 1 in the middle

Double Artillery X2 roll holder, 2 rolls with separation in the middle

Those of the X1 are for the V4 version, diameter of the bearing of the original roll holder 14 mm

Those of the x2 diameter of the original roll holder bearing are 11

-- I put an 8 mm threaded rod, 4 washers and 4 nuts on each side of the roll holder, as seen in the photographs to prevent it from widening or narrowing and the rollers from coming out.mm

Printer:

Artillery X1 and X2

Rafts:

No

Supports:

No

Resolution:

0.32

Infill:

100% or to taste

Filament brand:

Bq

Filament color:

White

Filament material:

Pla

Notes:

Printed vertically.

Printed on Pla Blanco, then painted blue with spray paint.