Blaster for Transformers Legacy Inferno

We need nothing less than more heavy arms for our newly arrived ant bot! Right out of the stasis pod, Inferno came fully armed to the teeth with this awesome blaster!

The blaster body has been textured to help it better fit his organic styling (more on this in a bit). With the original weapon, Inferno can dual wield for additional firepower too.

As the blaster barrel is sized to be pretty large, an adaptor piece is needed to help normal 5mm sized effect parts to be added on to it.

On the rearward side, a 5mm port has been designed into the screen reference power unit, allowing for effect parts or other compatible bits to be pegged on too, making for as fiery a pose as you would like!

Changing over to his alt mode, the blaster can be attached on via this the top port on his torso. And here, there's always the option of pegging on this original weapon using the rear port so that it is kept safe and doesn't go missing.

=== Parts ===

As mentioned above, there are three variants of the blaster, which respectively (from left to right) are version which have a (1) non-textured body, (2) a moderately textured body and a (3) heavily textured body.

Option (1) would be the smallest file and makes for easier slicing, while (2) and (3) have more faces in the model and are hence larger sized. Option (2) may work great if you are planning to resin 3d print it as the details should turn out ok, while option (3)'s deliberately over-exaggerated textures should help it show up decently on FDM prints.

===

Hope everyone enjoys adding this iconic screen-shown blaster to your own Infernos too. Happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog