cable car or gondola Z 1/220 scale (telepherique / telecabine z scale cable car Spur Z Telephärisch Seilbahn)

Hello, I offer you a simplified model of a small cable car at Z scale (more precisely gondola because there is only a carrying/tractor cable).

The .stl files were optimized for maximum Z-scale fineness on an fdm printer, with a standard nozzle.

Given the thinness of the parts, the cable car is intended more for static mounting.

It is possible to multiply the cabins, including queuing them in the upper and lower stations (disengageable cabins in reality).

I used white PLA and model paints (enamel type for the booth).

The .stl files are to be oriented in your slicer to minimize the supports.

The cabin can print in its normal position, without support (roof width small enough).

The guide that sits on the cable is to be connected to the cabin using a copper strand taken from a small multi-strand electrical wire.

The wheels are attached to the pylons using Märklin HO rail fastener / Märklin bridge assembly type screws.

To get a somewhat elastic black cable, just disassemble an old bungee cord (the inside is made of multiple unglued filaments).

The looped junction of the cable is a cyano glue.

printed in 0.1mm layers, cab in normal position (rotate stl 180°) without support, flat wheel with light support for throat, bases in normal position without support, posts in normal vertical position with supports, guides without support.