Skip to content

Cobalt floors

building.png Cobalt floors
second-floor-complete.jpg Cobalt floors
floor-complete.jpg Cobalt floors
Catwalkpillars.jpg Cobalt floors
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.4k views
  • 28 likes
  • 122 downloads
  • 1 collection
  • 1 make
License
3D design format
ZIP Folder details Close
  • Floorproject partly supported.zip
    • Catwalkpillars/Catwalkpillar 2 for Rampart.stl
    • Catwalkpillars/Catwalkpillar for Rampart.stl
    • Floors supported/Floor supported.lys
    • Floors supported/Floor1 supported.stl
    • Floors supported/Floor1.stl
    • Floors supported/Floor2 supportet.stl
    • Floors supported/Floor2.stl
    • Floors supported/Floor3 supported.stl
    • Floors supported/Floor3.stl
    • Floors supported/Floor4 supported.stl
    • Floors supported/Floor4.stl
    • Inner floors supported/Inner floor left pillar supported.lys
    • Inner floors supported/Inner floor left pillar supported.stl
    • Inner floors supported/Inner floor left pillar.stl
    • Inner floors supported/Inner floor middle supported.lys
    • Inner floors supported/Inner floor middle supported.stl
    • Inner floors supported/Inner floor middle.stl
    • Inner floors supported/Inner floor pillars supported.lys
    • Inner floors supported/Inner floor pillars supported.stl
    • Inner floors supported/Inner floor pillars.stl
    • Inner floors supported/Inner floor right pillar supported.stl
    • Inner floors supported/Inner floor right pillar.stl
    • Inner floors supported/Inner floor supported.lys
    • Inner floors supported/Inner floor supported.stl
    • Inner floors supported/Inner floor.stl
    • Midde floors supported/Middle floor grid supported.lys
    • Midde floors supported/Middle floor grid supported.stl
    • Midde floors supported/Middle floor grid.stl
    • Midde floors supported/Middle floor tears supported.lys
    • Midde floors supported/Middle floor tears supported.stl
    • Midde floors supported/Middle floor tears.stl
    • Other/Ladder.stl
    • Other/Pillaredge supported.lys
    • Other/Pillaredge supported.stl
    • Other/Pillaredge.stl
    • Other/Stairs landigpad.stl
    • Other/Stairs without Railing.stl
    • Outer floors supported/Outer floor left pillar supported.lys
    • Outer floors supported/Outer floor left pillar supported.stl
    • Outer floors supported/Outer floor left pillar.stl
    • Outer floors supported/Outer floor pillars supported.lys
    • Outer floors supported/Outer floor pillars supported.stl
    • Outer floors supported/Outer floor pillars.stl
    • Outer floors supported/Outer floor right pillar supported.stl
    • Outer floors supported/Outer floor right pillar.stl
    • Outer floors supported/Outer floor supported.lys
    • Outer floors supported/Outer floor supported.stl
    • Outer floors supported/Outer floor.stl
    • Slopes supported/Slope left pillar supported.lys
    • Slopes supported/Slope left pillar supported.stl
    • Slopes supported/Slope left pillar.stl
    • Slopes supported/Slope middle supported.lys
    • Slopes supported/Slope middle supported.stl
    • Slopes supported/Slope middle.stl
    • Slopes supported/Slope pillars supported.lys
    • Slopes supported/Slope pillars supported.stl
    • Slopes supported/Slope pillars.stl
    • Slopes supported/Slope right pillar supported.stl
    • Slopes supported/Slope right pillar.stl
    • Slopes supported/Slope supported.lys
    • Slopes supported/Slope supported.stl
    • Slopes supported/Slope.stl
    • Walls supported/Wall aquilla 1 supported.lys
    • Walls supported/Wall aquilla 1 supported.stl
    • Walls supported/Wall aquilla 1 supported_autosave/Wall aquilla 1 supported_2023-01-01_13-22-05.lyt
    • Walls supported/Wall aquilla 1.stl
    • Walls supported/Wall aquilla 3 supported.lys
    • Walls supported/Wall aquilla 3 supported.stl
    • Walls supported/Wall aquilla 3.stl
    • Walls supported/Wall middle supported.lys
    • Walls supported/Wall middle supported.stl
    • Walls supported/Wall middle supported_autosave/Wall middle supported_2023-01-17_20-57-00.lyt
    • Walls supported/Wall middle supported_autosave/Wall middle supported_2023-01-17_21-02-07.lyt
    • Walls supported/Wall middle supported_autosave/Wall middle supported_2023-01-17_21-07-07.lyt
    • Walls supported/Wall middle.stl
    • Walls supported/Wall no wall middle supported.lys
    • Walls supported/Wall no wall middle supported.stl
    • Walls supported/Wall no wall middle.stl
    • Walls supported/Wall no wall supported.lys
    • Walls supported/Wall no wall supported.stl
    • Walls supported/Wall no wall.stl
    • Walls supported/Wall pipe typ a supported.lys
    • Walls supported/Wall pipe typ a supported.stl
    • Walls supported/Wall pipe typ a.stl
    • Walls supported/Wall standard 1 supported.lys
    • Walls supported/Wall standard 1 supported.stl
    • Walls supported/Wall standard 1 supported_autosave/Wall standard 1 supported_2023-01-17_20-45-19.lyt
    • Walls supported/Wall standard 1.stl
    • Walls supported/Wall standard 3 supported.lys
    • Walls supported/Wall standard 3 supported.stl
    • Walls supported/Wall standard 3.stl
    • Walltoppers/Pillar short supported.lys
    • Walltoppers/Pillar short supported.stl
    • Walltoppers/Pillar short.stl
    • Walltoppers/Searchlight cylinder supported.lys
    • Walltoppers/Searchlight cylinder supported.stl
    • Walltoppers/Searchlight cylinder.stl
    • Walltoppers/Searchlight lense supported.lys
    • Walltoppers/Searchlight lense supported.stl
    • Walltoppers/Searchlight lense.stl
    • Walltoppers/Searchlight main supported.lys
    • Walltoppers/Searchlight main supported.stl
    • Walltoppers/Searchlight main.stl
    • Walltoppers/Searchlight support 1 supported.lys
    • Walltoppers/Searchlight support 1 supported.stl
    • Walltoppers/Searchlight support 1.stl
    • Walltoppers/Searchlight support 2 supported.lys
    • Walltoppers/Searchlight support 2 supported.stl
    • Walltoppers/Searchlight support 2.stl
    • Walltoppers/Ventilation Cap supported.lys
    • Walltoppers/Ventilation Cap supported.stl
    • Walltoppers/Ventilation Cap.stl
    • Wide door floors supported/Catwalkadapter supported.lys
    • Wide door floors supported/Catwalkadapter supported.stl
    • Wide door floors supported/Catwalkadapter.stl
    • Wide door floors supported/Door floor supported.lys
    • Wide door floors supported/Door floor supported.stl
    • Wide door floors supported/Door floor.stl
  • Floorproject.zip

Learn more about the formats
Last update 2023-01-23 at 09:38
Publication date 2022-12-06 at 21:06
Design number 951209
Takeno

Takeno

3D printer file info

3D model description

Modular flooring system for the cobalt factory terrain that actually works :D

This Set contains all decorativ parts needed to build your own usable cobalt factory floors that actually hold models on them without the constant fear of dropping them.

You need the "Cobalt grid" set to assamble the floors.

A hughe thanks goes to Slon from which i got the idea for this sort of assambly and buchered some of his Parts to create new parts for the flooring system. The benefits are that his Catwalk system can now be connected to the cobalt factory to create modular killteam boards if the terrain is not needed for large scale wargames :) Check out his sets, the most parts are compatible.
https://cults3d.com/en/users/Slon/creations

Every floor can be build with walls, with a "hard" edge and with a sloped edge for ground levels.

The "big walls " are placeholders for the actual cobalt factory walls. The floor work with both wall hights.

This set will be constantly updated with new parts. The next addition will be Catwalkadapters for the small but high walls.

Update 2023.01.23:

  • Supports for most of the basic parts added.
  • Pictures under makes added.

Todo:
- More Walltoppers
- door tiles for the small doors

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.