Dart Light/Dart Ring 2.0

Hello,

I have optimized my original version of the lighting again. This is now screwed with additional connecting plates, so that the shape stability of the ring is even better and the round shape is also better preserved.

I have here a dart lighting self constructed since I do not like the lighting available for purchase. I have constructed the lighting so that the holder is not visible when playing and the outer edge of the lighting is flush with the surround of the disc (identical diameter). This gives it a clean and coherent overall look. Overall, the lighting fits the Winmau Blade 5 dartboards with surround, but has also been installed on other dartboards.

The holders are attached to the board via glued-in magnets (see 2x notch on the holder), so that the lighting sits firmly on the board. The end piece of the frame part has a cutout to allow the LED strip light to be inserted. The LED strip is glued to the slanted part of the frame so that the alignment of the LED lights to the board is positioned.

The individual frame parts are connected via the connecting parts and should also be glued with plastic adhesive for a firmer hold.

A total of 10 frame parts (9x frame part and 1x end piece frame part), 4 holders and 7 connecting parts are required.

In addition, the lighting requires the attachment of 6 disc magnets and one LED strip light.

The lighting does not interfere with playing and Hält even accidental hits with the arrow. Overall, I have my lighting already installed for 2 years and have not had to replace any part.

Just print and build it yourself and upgrade the dartboard with great lighting for an even better gaming experience.

3D print settings

Printer Crealitiy Ender 5 pro

Printing speed 80mm/s

Printing temperature 195°C

Filament: Redline filament (black) PLA

15% Infill